Horizontal bar

The DCF77 signal

Horizontal bar

The protocol is quite simple: every minute the full time and date is transmitted in 59 bit (from 0 to 58). At the beginning of every second a bit is transmitted by reducing to 25% (-6dB) the 77.5kHz carrier (amplitude modulation) for 100ms (logical 0) or for 200ms (logical 1). The 60th bit is not emitted and this is used as a marker for the beginning of the next code.

DCF signal diagram

BitNameDescriptionComment
0..14-Reserved
15RAntenna bit1 when secondary antenna is used
16A1Delta DST bit1 when DST change occurs in next hour
17Z1Time zone bit 11 when DST is set
18Z2Time zone bit 2usually the opposite of Z1
19A2Commutation bit1 when a 61 seconds minutes is inserted
20SStart bitalways 1
21..27MMinutes7 bit (BCD, LSB first, 00..59)
28P1First parity bitEven parity for all transmitted bits
29..34HHours6 bit (BCD, LSB first, 00..23)
35P2Second parity bitEven parity for all transmitted bits
36..41DMDay of month6 bit (BCD, LSB first, 01..31)
42..44DWDay of week3 bit (BCD, LSB first, 1=monday..7=sunday)
45..49MNMonth5 bit (BCD, LSB first, 01..12)
50..57YYear8 bit (BCD, LSB first, 00..99)
58P3Third parity bitEven parity for all transmitted bits

Three times per hour (during the 19th, the 39th and the 59th minute) the sender ID (DCF77) is emitted in Morse code by a 25% amplitude modulation of 250Hz between second marks (without suspending time signals).

Horizontal bar

Back Back to DCF77. Home Back to the home page.
Previous Previous page. Next Next page.

Horizontal bar

Italiano Questa pagina è disponibile anche in italiano.

Horizontal bar