What are toroids? Sometimes these are incorrectly spelt torroids. These come in two types, powdered iron toroids or ferrite toroids. Both introduce permeability. Toroids look exactly like doughnuts and come in various diameters, thicknesses, permeabilities and types depending upon the requency range of interest. Includes links to Micrometals inductor design software and Micrometals RF design software."

www.electronics-tutorials.com



Engineering Formulas

Google
Search WWW Search www.electronics-tutorials.com

This site is hosted at WebWizards.Net for better value.

Don't leave this valuable site without visiting my book shop to see my recommendations. This helps keep this site FREE for everyone.

recommend this page to a friend
 

you can have this page translated /vous pouvez faire traduire ces pages /Sie können lassen diese Seiten übersetzen /potete fare queste tradurre pagine /você pode ter estas páginas traduzido /usted puede hacer estas paginaciones traducir

TOROIDS


What are toroids?

These come in two types. Powdered Iron or Ferrites. Both introduce permeability, that means an increased inductance for a given number of turns. Toroids look exactly like doughnuts and come in various diameters, thicknesses, permeabilities and types depending upon the requency range of interest. Note the correct spelling, not torroids

Some of the advantages of toroids are:

1. High inductance for the physical space occupied.

2. No interaction or coupling with adjacent components (unlike air wound and other inductors).

3. Various permeabilities are available.

4. Exceptional Q values when wound correctly and optimum core and windings selected.

5. Wide range of diameters and thicknesses.

6. Relatively low cost

7. Often simple to mount or secure mechanically.

Some of the disadvantages of toroids are:

1. Nearly impossible to introduce variable tuning of the inductance.

2. Subject to some thermal drift.

toroid core

Fig 1. - Toroid Core

A typically popular type is made available by Micrometals and a representative example is the T50-2. This core is lacquered red (so you know the type) and has the following main properties.

Being T50 it's outside diameter is 0.5", the ID is 0.3" and the thickness is 0.19"

The permeabilities or in this case AL factors i.e. ( inductance per 100 turns2 ) are:

TYPE            COLOR        AL                      Freq. Range

T50-26        Yel-Wh        320uH                  power freq.
T50-3          Gray           175                      50 Khz to 500 Khz
T50-1          Blue            100                      500 Khz to 5 Mhz
T50-2          Red              57                      2 Mhz to 30 Mhz
T50-6          Yellow          47                       10 to 50 Mhz
T50-10        Black            32                        30 to 100 Mhz

This is only a small sample to give you an idea. Your turns required to give a certain inductance based on the above AL  is as follows:

N = 100 * Ö[ L / AL]

Therefore to obtain an inductance of 3.685 uH using a T50-6 toroid would require 28 turns (of course I cheated again) but check it out on your calculator as I may have left in a deliberate mistake to see if you're awake.

By the way don't get too paranoid about the exact number of turns because cores do vary in value anyway and particularly with temperature changes.

I finally got around to photographing some coils and toroids.

photograph of some coils and toroids

Figure 2 - photograph of some coils and toroids

Sorry for the poor lighting. The top two toroids on the left are T68-2 types (red). Below that is the yellow T50-6 type. To the right of the yellow toroid are two RFC (radio frequency chokes) one is 1 mH and the other is 2.5 mH. Above the RFC, lying diagonally, is a 4.7 uH (nominal) variable inductor from J.W. Miller. At the extreme left of the photo is the tip of a similar variable inductor where the tuning screw is a little more clearer.

Finally to the middle right is a wound toroid I salvaged from somewhere.

Mike Czuhajewski WA8MCQ has produced a Toroid Chart

Mike Czuhajewski has this excellent chart for toroids, print it out.

See: Mike's Toroid Chart

Mounting Toroids

A considerable amount of work has been done by Roy Lewallen, W7EL on the important topic of mounting toroids.

It is quite often important in applications such as LC filters to preserve "Q" as high as possible. Roy has done quite a lot of research in this area.

In part, Roy says...

"Of the materials tested, both types of RTV stand out as having a negligible effect on inductor Q. Hot melt glue and paraffin have a small enough effect that they should be tolerable for many applications. Duco cement seriously degrades Q, even in a much thinner layer than the other coatings. The "sealing tape", tested out of curiosity, shows just how great a degradation can be caused by a poor coating........."

See: http://www.qrp.pops.net/w7el.htm

Micrometals RF Design Software

FREE Micrometals RF design software, RF-Toroid was written as a supplement to the Micrometals RF Application catalog. Much emphasis was put into calculating the location of the Self resonate frequencies for series and shunt inductors. RF-Toroid is for use DC to 300 MHz. Much research went in to the calculation and corrections from the standard formulas for low perm & phenolic cores to better predict the RF style of winding and application.

Some features include SRF for series and shunt cores, peak Q curve ranges and 200 & 360 degree coverage to achieve the best product possible for the microwave designer who needs accurate and abundant information at the finger tips to compare one core to another simultaneously. The custom core feature allows for custom shaped cores, stacking cores side by side , ferrite cores and machining custom phenolic cores from plastic, wood, ect... Micrometals hope this tool will serve you well.

Download Micrometals RF Design Software - 397Kb

Micrometals Inductor Design Software

Go to Micrometals Inductor Design Software for other inductor software.

PLEASE NOTE:The toroid part numbers mentioned herein and elsewhere on my sites are copyright © Micrometals, Inc.

Inexpensive source of Toroids in USA

My very good friend Dieter (DIZ) Gentzow - W8DIZ - of Loveland, Ohio, tells me, "as far as I know, my prices for Toroids are the best in town/county/world :)"

Diz goes on to say "the web page with the info is at... http://www.kitsandparts.com/toroids.html"

I'm sure Diz will look after you kindly.

Link to this page

NEW! - How to link directly to this page

Want to create a page link to me from your site? It couldn't be easier. No HTML knowledge required; even the technophobes can do it. All you need to do is copy and paste, the following code. All links are greatly appreciated; I sincerely thank you for your support.

Copy and paste the following code for a text link:

<a href="http://www.electronics-tutorials.com/basics/toroids.htm" target="_top">visit Ian Purdie VK2TIP's "Toroids" Page</a>

and it should appear like this:
visit Ian Purdie VK2TIP's "Toroids" Page


 
 
 

Innovative Products For Kids and Adults

This site is hosted at WebWizards.Net for better value.

CARE TO BE A PRACTICAL SUPPORTER OF THIS SITE?

As you would imagine maintaining this site costs me considerable sums of money in many, many ways. If you believe this site is a valuable and FREE educational resource and, YOU want to keep it that way, then here's how YOU can demonstrate your very practical support for this site..

Thanks to these fine folks making voluntary donations, ensuring this site and our Newsletter remains FREE. Could YOU be listed here for your small contribution in return for your FREE education?. Our grateful thanks.
 

rate this page for me

recommend this page to a friend

Please send me your valuable comments and suggestions! Tell your friends, tell a news group, tell your favourite magazine, heck tell the world!

Absolutely essential to keeping abreast of new and updated electronics tutorials is our comments or subscribe to our highly regarded FREE monthly newsletter form. Unsubscribe any time you like. You can view immediate past issues here to see if it is to your liking.
 

Related topics on inductance

1. audio transformers

2. chokes

3. coil formers and cores

4. inductive reactance

5. mobius winding techniques

6. power supply transformers

7. toroid cores

8. wide band rf transformers





Products offered for the scrolling printers


the author Ian C. Purdie, VK2TIP of www.electronics-tutorials.com asserts the moral right to be identified as the author of this web site and all contents herein. Copyright © 2000, all rights reserved. See copying and links. These electronic tutorials are provided for individual private use and the author assumes no liability whatsoever for the application, use, misuse, of any of these projects or electronics tutorials that may result in the direct or indirect damage or loss that comes from these projects or tutorials. All materials are provided for free private and public use.
Commercial use prohibited without prior written permission from www.electronics-tutorials.com.


Copyright © 2000 - 2001, all rights reserved. URL - www.electronics-tutorials.com/basics/toroids.htm

Updated 13th August, 2001

webmaster@electronics-tutorials.com




Click Here!