Subject: TM-231 Low Mic Audio Fix
A quick and dirty fix for the knwd tm231a low mic output till (if) knwd
comes out with a fix is to bypass r 63 (3.3k). r 63 and r64 form a
voltage divider at the input to the mic amp. r63 is on the bottom of
the rig. with the bottom cover off and the front of the rig facing you,
locate the mic amp board 3610 which stands vertically off the
mother board. follow the 3rd pin from the left to r63. a jumper here
gives the tx audio a nice boost. be sure to readjust the dtmf output
in the mic (the only pot in the mic). 73 and good luck. greg.
1951z, 473 msgs, #1786 last @kd6th-4 mailbox>
Return to
the mods-t-z file section.
|