DR119T
From: WB3FKP @KB3QW.#EPA.PA.USA.NA
MARK IN ALDEN,PA
Subject: EXTENDED FREQUENCY MOD FOR ALINCO DR119T 2 METER TRANSCEIVER
**Remove the two screws from on the top cover and loosen the four side screws
(don't have to remove) and remove cover
**Cut the single wire (blue) standing up from behind the tuning knob
(large knob on left front of rig)
**Cover the ends of the wire with tape or heat shrink tubing
**Replace cover
When done do a master reset of the rig as per manual- hold
F and VFO/M buttons while turning the radio ON.
To change bands press function (F) followed by MHZ button
After the mod I now had:
130 MHZ - 173 MHZ Receive and transmit (130-169.995MHZ )
335 MHZ - 409 MHZ Receive (340-380MHZ band)
810 MHZ - 989.995 MHZ Receive (870-890MHZ band)
Good luck and happy listening! 73 Mark
****************************************************************************
THANKS AND HOPE TO HEAR FROM YOU. 73 MARK
WB3FKP @KB3QW.#EPA.PA.USA.NA
Return to
the mods-a-d file section.
|