Configuration Type:
TT1-6

RATIO		 Frequency
MHz		 Insertion Loss Case
Style		 Conn-
ection
3 dB
MHz		 2 dB
MHz		 1 dB
MHz
1.00 0-300  -300 0.02-200 0.10-50 W38 ex

Pin Connections
Port Primary
Dot		 Primary Primary
CT		 Second-
ary Dot		 Second-
ary		 Second-
ary CT		 Gnd
Ext.		 Case
Gnd		 Not
Used
ex 4 6 5 3 1 2 - - -



Case Style - W38 (inch,mm )   weight: 0.5 grams.
A B C D E F G H J
.30
7.620		 .27
6.858		 .23
5.842		 .010
0.254		 .042
1.067		 .020
0.508		 .100
2.540		 .05
1.270		 .09
2.286
K L M N P Q R S T
.31
7.874		 .036
0.914		              
Tolerance: .x ± .1  .xx ± .03  .xxx ± .015 inch.
Material and Finish:
    Case material: plastic. Lead Finish: tin-lead plate.
Special Tolerances:
    Lead width ±.010; lead thickness ±.005 inch.

 Notes:
• FOR A AND B CONFIGURATIONS:
Typical Amplitude Unbalance: 0.1 dB over 1 dB frequency range; 0.5 dB over entire frequency range.
Typical Phase Unbalance: 1.0° over 1 dB frequency range; 5.0° over entire frequency range.
• Absolute power, voltage and current ratings:
RF input power: 0.25 Watt rating
DC current, 30mA.
• Operating temperature range is -20°C to +85°C.
• Impedance ratio = secondary/primary
• Two case styles available: Plug-in case style X65; Radial lead case style W38.
• Insertion loss is specified with input at pin 4 and output at pin1 with pins 6 & 3 grounded and pins 2 & 5 open.
• Insertion loss referenced to mid-band loss
• General Quality Control Procedures and Environmental Specifications are given in Mini-Circuits Guarantees Quality.
Hi-Rel, MIL description are given in Hi-Rel and MIL
• Prices and Specifications subjects to change without notice.

FREQ.
(MHz)		 Insertion
Loss(dB)		 Input Return
Loss(dB)
0.004 2.53 4.71
0.020 0.29 15.34
1.153 0.10 37.84
100.858 0.89 10.71
151.507 1.10 9.32
200.000 1.08 9.41
280.250 0.87 12.74
350.000 0.81 24.39
430.250 1.11 11.24
500.000 2.74 6.16