TO-0812LN
Frequency
MHz
GAIN, dB Maximum Power, dBm Dynamic Range DC Power
fL - fU Min. Max.
Flatness
Min. Input
(no
damage)
NF
dB
Typ.
IP3
dBm
Typ.
Cur-
rent
(mA)
Volt(V.)
800-1200 20 ±1.00 +8.00 +13 1.60 18 70 15
Lw=low range(fL to fU/2)  U=upper range(fU/2 to fU)

Pin Connections
Port RF in RF Out DC Case GND Not Used
ce 5 11 2 1,3,4,6,7,8,9,10,12 -



Case Style - QQ96 (inch,mm )   weight: 4 grams.
A B C D E F G H J
.600
15.240
.250
6.350
.25
6.350
.016
0.406
.020
0.508
.04
1.016
.400
10.160
.200
5.080
.200
5.080
K L M N P Q R S T
.100
2.540
               
Tolerance: .x ± .1  .xx ± .03  .xxx ± .015 inch.
Material and Finish:
    Header and lead finish: gold plate per MIL-G-45204. Case material: Nickel
Marking:
    For Pin designations see specification data sheet.

Notes:
Open load is not recommended, potentially can cause damage. With no load, derate max. input power by 20dB.
For Amplifier Selection Guide, please click here.
For Amplifier Environmental Specifications, please click here.
NF specified at room temperature, increases to 2 dB typical at +85°C.
General Quality Control Procedures and Environmental Specifications are given in Mini-Circuits Guarantees Quality.
Hi-Rel, MIL description are given in Hi-Rel and MIL
Prices and Specifications subjects to change without notice.

FREQ
(MHz)
Gain (dB) Directivity (dB) VSWR N.F.
(dB)
Pout(dBm)
(@1dB COMPR)
12.0V 15V 16V 12.0V 15V 16V IN OUT
800.0 23.09 24.20 24.48 9.9 9.1 8.7 1.26 2.18 1.49 11.86
829.0 22.97 24.04 24.28 9.7 8.9 8.9 1.15 2.06 1.47 12.11
869.2 22.77 23.77 23.99 9.7 8.9 9.0 1.18 1.94 1.36 12.31
911.5 22.51 23.47 23.69 10.1 9.4 9.5 1.29 1.78 1.25 12.51
953.8 22.30 23.25 23.46 10.1 9.5 9.6 1.39 1.71 1.18 12.59
994.9 22.18 23.11 23.33 10.2 9.9 9.8 1.47 1.58 1.16 12.74
1046.2 22.13 23.04 23.25 10.1 9.8 9.9 1.58 1.49 1.16 12.61
1097.4 22.17 23.02 23.20 9.7 9.7 9.6 1.68 1.40 1.24 12.39
1148.7 22.12 22.89 23.06 9.5 9.6 9.8 1.81 1.36 1.33 12.14
1200.0 22.00 22.70 22.85 9.5 9.8 9.9 2.01 1.42 1.44 11.98