TIA-1000-1R8 Frequency MHz GAIN, dB Maximum Power, dBm Dynamic Range VSWR fL - fU Min. Max. Flatness Output (1 dB Comp.) Min. Input (no damage) NF dB Typ. IP3 dBm Typ. In Typ. Out Typ. DC-1000 35 ±2.00 +35 +32 +7.00 8.00 45 2.50 2.50 Lw=low range(fL to fU/2)  U=upper range(fU/2 to fU)

Case Style - AP175 (inch,mm )   weight: 3500 grams. A B C D E F G H J 9.8 248.920 5.0 127.000 6.7 170.180 0.2 5.080           K L M N P Q R S T                   Tolerance: .x ± .1  .xx ± .03  .xxx ± .015 inch. Material and Finish:     Case material: aluminum alloy. Finish: grey paint or yellow iridite. Connectors:     For ZFSC-5 a fifth connector is offered as Port 5 in-line and opposite of sum(s) port.

Notes: • Open load is not recommended, potentially can cause damage. With no load, derate max. input power by 20dB. • For Amplifier Selection Guide, please click here. For Amplifier Environmental Specifications, please click here. • For TIA-1000 models, add dash 2 (-2) to model no. for 220V operation. • VSWR specified at: 350-900 MHz. • All TIA models are protected under U.S. patent 5, 101, 171. • Gain and maximum output power specified at 25°C±5°C., over temperature, specifications degrade approximately 1dB, gain flatness ±2.5dB maximum for TIA-10001R8 and TIA-1000-4. • VSWR specified at: 340-1000 MHz. • Operating temperature: 0°C to +55°C.; Storage temperature: -40°C to +70°C. • General Quality Control Procedures and Environmental Specifications are given in Mini-Circuits Guarantees Quality. Hi-Rel, MIL description are given in Hi-Rel and MIL • Prices and Specifications subjects to change without notice.