HELA-10C
Frequency
MHz		 GAIN, dB Maximum Power, dBm Dynamic Range VSWR DC Power Thermal
resistance
Øjc
°C/W
fL - fU Min. Typ. Max. Typ.
Flatness		 Output
(1 dB
Comp.)		 Min. Input
(no
damage)		 NF
dB
Typ.		 IP3
dBm
Typ.		 In
Typ.		 Out
Typ.		 Cur-
rent
(mA)		 Volt(V.)
5.00-450 9.00 11 12 ±0.40 +30 +26 +20 3.50 48 1.30 1.20 525 12 6.00
Lw=low range(fL to fU/2)  U=upper range(fU/2 to fU)

Pin Connections
Port RF in RF Out DC Case GND Not Used
kl 3,6 11,14 10,15 1,4,5,8,9,12,13,16 2,7



Case Style - CM624 (inch,mm )   weight: 0.67 grams.
A B C D E F G H J
.295
7.493		 .405
10.287		 .095
2.413		 .406
10.312		   .050
1.270		 .016
0.406		 .008
0.203		 .004
0.102
K L M N P Q R S T
.032
0.813		 .091
2.311		 .102
2.591		 .028
0.711		 .460
11.684		   .130
3.302		 .340
8.636		  
Tolerance: .x ± .1  .xx ± .03  .xxx ± .015 inch.
Material and Finish:
    Case material: plastic. Lead Finish: tin-lead plate.
Packaging:

Packaging information:
Tape Width(mm): 16
Reel Size(inches): 13
Device Cavity Pitch(mm): 12
Devices Per Reel: 1000

 Notes:
• Open load is not recommended, potentially can cause damage. With no load, derate max. input power by 20dB.
• For Amplifier Selection Guide, please click here.
For Amplifier Environmental Specifications, please click here.
• Tested with recommended application schematic diagram.
• For 75 ohm. For 50 ohm, VSWR increases from 1.2:1 at 1 Ghz to 2.0:1 at 500 MHz.
• For Surface Mount Environmental Specifications, please click here.
Re-flow soldering information is available in "Surface Mount" article.
• Gain includes transformer losses at input & output.
• Thermal resistance is from juction to heat slug.
• Absolute maximum ratings:
Heat slug temperature: 110°C max.
Storage temperature: -40°C to 150°
DC voltage: 13V
DC power: 7.15W
• Non-hermetic
• General Quality Control Procedures and Environmental Specifications are given in Mini-Circuits Guarantees Quality.
Hi-Rel, MIL description are given in Hi-Rel and MIL
• Prices and Specifications subjects to change without notice.