HELA-10B

HELA-10B

Frequency
MHz

GAIN, dB

Maximum Power, dBm

Dynamic Range

VSWR

DC Power

Thermal
resistance
Øjc
°C/W

f_L - f_U

Min.

Typ.

Max.

Typ.
Flatness

Output
(1 dB
Comp.)

Min.

Input
(no
damage)

NF
dB
Typ.

IP3
dBm
Typ.

In
Typ.

Out
Typ.

Cur-
rent
(mA)

Volt(V.)

50-1000

±0.40

+30

+26

+20

3.50

1.20

525

6.00

L_w=low range(f_L to f_U/2) U=upper range(f_U/2 to f_U)

Pin Connections

Port	RF in	RF Out	DC	Case GND	Not Used
kl	3,6	11,14	10,15	1,4,5,8,9,12,13,16	2,7

Case Style - CM624 (inch,mm )   weight: 0.67 grams.

A B C D E F G H J

.295
7.493 .405
10.287 .095
2.413 .406
10.312 .050
1.270 .016
0.406 .008
0.203 .004
0.102

K L M N P Q R S T

.032
0.813 .091
2.311 .102
2.591 .028
0.711 .460
11.684 .130
3.302 .340
8.636
Tolerance: .x ± .1  .xx ± .03  .xxx ± .015 inch.
Material and Finish:

    Case material: plastic. Lead Finish: tin-lead plate.
Packaging:

Packaging information:
Tape Width(mm): 16
Reel Size(inches): 13
Device Cavity Pitch(mm): 12
Devices Per Reel: 1000

Notes:

•	Open load is not recommended, potentially can cause damage. With no load, derate max. input power by 20dB.
•	For Amplifier Selection Guide, please click here. For Amplifier Environmental Specifications, please click here.
•	Tested with recommended application schematic diagram.
•	For 75 ohm. For 50 ohm, VSWR increases from 1.2:1 at 1 Ghz to 2.0:1 at 500 MHz.
•	For Surface Mount Environmental Specifications, please click here. Re-flow soldering information is available in "Surface Mount" article.
•	Gain min is 9.5 dB min. at 800-1000 MHz.
•	Gain includes transformer losses at input & output.
•	Thermal resistance is from juction to heat slug.
•	Absolute maximum ratings: Heat slug temperature: 110°C max. Storage temperature: -40°C to 150° DC voltage: 13V DC power: 7.15W
•	Non-hermetic
•	General Quality Control Procedures and Environmental Specifications are given in Mini-Circuits Guarantees Quality. Hi-Rel, MIL description are given in Hi-Rel and MIL
•	Prices and Specifications subjects to change without notice.