ERA-6
Frequency
MHz		 GAIN, dB Maximum Power, dBm Dynamic Range VSWR Absolute
Maximum
Rating		 DC Power Thermal
resistance
Øjc
°C/W
fL - fU Min. Typ.
Flatness		 Output
(1 dB
Comp.)		 Min. Input
(no
damage)		 NF
dB
Typ.		 IP3
dBm
Typ.		 In
DC-3
GHz		 In
3-fu
GHz		 Out
DC-3
GHz		 Out
3-fu
GHz		 I
(mA)		 P
(mW)		 Cur-
rent
(mA)		 Volt(V.)
DC-4000 10 ±0.20 +18 +16 +20 4.50 36 +1.30 1.20 1.60 1.80 120 650 70 5.00 170
Lw=low range(fL to fU/2)  U=upper range(fU/2 to fU)

Pin Connections
Port RF in RF Out DC Case GND Not Used
cb 1 3 3 2,4 -



Case Style - VV105 (inch,mm )   weight: 0.015 grams.
A B C D E F G H J
.085
2.159		 .060
1.524		 .008
0.203		 .020
0.508		 .256
6.502		 .012
0.305		 .025
0.635		    
K L M N P Q R S T
                 
Tolerance: .x ± .1  .xx ± .03  .xxx ± .015 inch.
Material and Finish:
    Case material: plastic. Lead Finish: tin-lead plate.
Marking:
    RF input lead (1) identified by one or both of the following at factory option:
(a) diagonally cut lead, which may be 45°(ref) in either direction;
(b) orientation mark on the case. Model dash number identified by color dot or alphanumeric code on case. See specification data sheet.
Special Tolerances:
    Lead width ±.010; lead thickness ±.005 inch.

 Notes:
• ERA-SM models available on tape and reel.
• Model number designated by alphanumeric code marking.
• Permanent damage may occur if any of these limits are exceeded. These ratings are not intended for continuous normal operation.
• Application notes: Improved ERA Amplifiers
• For Amplifier Selection Guide, please click here.
For Amplifier Environmental Specifications, please click here.
• For Surface Mount Environmental Specifications, please click here.
Re-flow soldering information is available in "Surface Mount" article.
• Low frequency cutoff determined by external coupling capacitors.
• Gain, VSWR at 2 GHz.
• Maximum Power, NF, IP3 at 1 GHz.
• fU is the upper frequency limit for each model as shown in the table.
• Non-hermetic
• Absolute maximum ratings:
Operating temperature: -45°C to 85°C,
Storage temperature: -65° to 150°C,
Device voltage:
4.6V min., 5.6V max.
• Typical Biasing Configuration ERA/MAR/MAV/RAM/VAM
• Reliability predictions and normal operation conditions are applicable at current specified.
• General Quality Control Procedures and Environmental Specifications are given in Mini-Circuits Guarantees Quality.
Hi-Rel, MIL description are given in Hi-Rel and MIL
• Prices and Specifications subjects to change without notice.