| |
ERA-SM models
available on tape and reel. |
| |
Model number
designated by alphanumeric code marking. |
| |
Permanent damage
may occur if any of these limits are exceeded. These ratings are not
intended for continuous normal operation. |
| |
Application
notes: Improved ERA
Amplifiers |
| |
For Amplifier
Selection Guide, please click here. For
Amplifier Environmental Specifications, please click here. |
| |
For Surface
Mount Environmental Specifications, please click here. Re-flow
soldering information is available in "Surface
Mount" article. |
| |
Low frequency
cutoff determined by external coupling capacitors. |
| |
Gain, VSWR at 2
GHz. |
| |
Maximum Power,
NF, IP3 at 1 GHz. |
| |
Operating
temperature: -45°C to 85°C. Storage temperature: -65° to
+150°C. |
| |
Typical Biasing
Configuration ERA/MAR/MAV/RAM/VAM
 |
| |
Supply voltage
must be connected to pin 3 through a bias resistor in order to
prevent damage. See Biasing MMIC
Amplifiers. Reliability predictions are applicable at specified
current and normal operating conditions. |
| |
General Quality
Control Procedures and Environmental Specifications are given in Mini-Circuits
Guarantees Quality. Hi-Rel, MIL description are given in Hi-Rel and
MIL |
| |
Prices and
Specifications subjects to change without
notice. |