ERA-5
Frequency
MHz
GAIN, dB Maximum Power, dBm Dynamic Range VSWR Absolute
Maximum
Rating
DC Power Thermal
resistance
Øjc
°C/W
fL - fU Min. Typ.
Flatness
Output
(1 dB
Comp.)
Min. Input
(no
damage)
NF
dB
Typ.
IP3
dBm
Typ.
In
DC-3
GHz
In
3-fu
GHz
Out
DC-3
GHz
Out
3-fu
GHz
I
(mA)
P
(mW)
Cur-
rent
(mA)
Volt(V.)
DC-4000 16 ±1.00 +18 +16 +13 4.30 32 +1.30 1.30 1.20 1.30 120 650 65 4.90 278
Lw=low range(fL to fU/2)  U=upper range(fU/2 to fU)

Pin Connections
Port RF in RF Out DC Case GND Not Used
cb 1 3 3 2,4 -



Case Style - VV105 (inch,mm )   weight: 0.015 grams.
A B C D E F G H J
.085
2.159
.060
1.524
.008
0.203
.020
0.508
.256
6.502
.012
0.305
.025
0.635
   
K L M N P Q R S T
                 
Tolerance: .x ± .1  .xx ± .03  .xxx ± .015 inch.
Material and Finish:
    Case material: plastic. Lead Finish: tin-lead plate.
Marking:
    RF input lead (1) identified by one or both of the following at factory option:
(a) diagonally cut lead, which may be 45°(ref) in either direction;
(b) orientation mark on the case. Model dash number identified by color dot or alphanumeric code on case. See specification data sheet.
Special Tolerances:
    Lead width ±.010; lead thickness ±.005 inch.

Notes:
• ERA-SM models available on tape and reel.
• Model number designated by alphanumeric code marking.
• Permanent damage may occur if any of these limits are exceeded. These ratings are not intended for continuous normal operation.
• For Amplifier Selection Guide, please click here.
For Amplifier Environmental Specifications, please click here.
• For Surface Mount Environmental Specifications, please click here.
Re-flow soldering information is available in "Surface Mount" article.
• Low frequency cutoff determined by external coupling capacitors.
• Gain, VSWR at 2 GHz.
• Maximum Power, NF, IP3 at 1 GHz.
• fU is the upper frequency limit for each model as shown in the table.
• Non-hermetic
• Absolute maximum ratings:
Operating temperature: -45°C to 85°C,
Storage temperature: -65° to 150°C,
Device voltage:
4.2V min., 5.5V max.
• Typical Biasing Configuration ERA/MAR/MAV/RAM/VAM
• Reliability predictions and normal operation conditions are applicable at current specified.
• General Quality Control Procedures and Environmental Specifications are given in Mini-Circuits Guarantees Quality.
Hi-Rel, MIL description are given in Hi-Rel and MIL
• Prices and Specifications subjects to change without notice.