| 
        
        
          | Pin 
            Connections 
              
              
                | Port | RF 
                  in | RF 
                  Out | DC | Case 
                  GND | Not 
                  Used |  
                | cb | 1 | 3 | 3 | 2,4 | - |  |   
 
 
        
        Material and Finish:
          | Case Style - VV105 
            (inch,mm )   weight: 0.015 grams. 
              
              Tolerance: .x 
            ± .1  .xx ± .03  .xxx ± .015 
            inch.
                | A | B | C | D | E | F | G | H | J |  
                | .085 2.159
 | .060 1.524
 | .008 0.203
 | .020 0.508
 | .256 6.502
 | .012 0.305
 | .025 0.635
 |  |  |  
                | K | L | M | N | P | Q | R | S | T |  
                |  |  |  |  |  |  |  |  |  |  |  
 
        
        Marking:
          |  | Case material: plastic. 
            Lead Finish: tin-lead plate. |  
 
        
        Special Tolerances:
          |  | RF input lead (1) 
            identified by one or both of the following at factory option: 
            (a) diagonally cut lead, which may be 45°(ref) in either 
            direction;
            (b) orientation mark on the case. Model dash number identified 
            by color dot or alphanumeric code on case. See specification data 
            sheet. |  
 
        
        
          |  | Lead width ±.010; lead 
            thickness ±.005 inch. |  
 | Notes: 
        
        
          |  | Model number 
            designated by alphanumeric code marking. |  
          |  | Permanent damage 
            may occur if any of these limits are exceeded. These ratings are not 
            intended for continuous normal operation. |  
          |  | Application 
            notes: Improved ERA 
            Amplifiers |  
          |  | For Amplifier 
            Selection Guide, please click here. For 
            Amplifier Environmental Specifications, please click here.
 |  
          |  | For Surface 
            Mount Environmental Specifications, please click here. Re-flow 
            soldering information is available in "Surface 
            Mount" article.
 |  
          |  | Low frequency 
            cutoff determined by external coupling capacitors. |  
          |  | Gain, VSWR, 
            Maximum power, NF, IP3 at 2 GHz. |  
          |  | fU is 
            the upper frequency limit for each model as shown in the 
            table. |  
          |  | Absolute maximum 
            ratings: Operating temperature: -45°C to 85°C,
 Storage 
            temperature: -65° to 150°C,
 Device voltage: 
            3.0V min., 4.1V max.
 |  
          |  | Typical Biasing 
            Configuration ERA/MAR/MAV/RAM/VAM 
  |  
          |  | Reliability 
            predictions and normal operation conditions are applicable at 
            current specified. |  
          |  | General Quality 
            Control Procedures and Environmental Specifications are given in Mini-Circuits 
            Guarantees Quality. Hi-Rel, MIL description are given in Hi-Rel and 
            MIL
 |  
          |  | Prices and 
            Specifications subjects to change without 
        notice. |  
 |