AMP-77
Frequency
MHz
GAIN, dB Maximum Power, dBm Dynamic Range VSWR DC Power
fL - fU Min. Min.
Flatness
Max.
Flatness
Output
(1 dB
Comp.)
Input
(no
damage)
NF
dB
Typ.
IP3
dBm
Typ.
In
Typ.
Out
Typ.
Cur-
rent
(mA)
Volt(V.)
5.00-500 15 ±0.40 ±1.00 +16 +13 3.30 32 2.00 2.00 56 15
Lw=low range(fL to fU/2)  U=upper range(fU/2 to fU)

Pin Connections
Port RF in RF Out DC Case GND Not Used
cd 2 4 1 3 -



Case Style - PP120 (inch,mm )   weight: 1.5 grams.
A B C D E F G H J
.50
12.700
.21
5.334
.150
3.810
.016
0.406
.020
0.508
.04
1.016
.300
7.620
   
K L M N P Q R S T
                 
Tolerance: .x ± .1  .xx ± .03  .xxx ± .015 inch.
Material and Finish:
    Header and lead finish: gold plate per MIL-G-45204. Case material: Nickel
Marking:
    For Pin designations see specification data sheet.

Notes:
Open load is not recommended, potentially can cause damage. With no load, derate max. input power by 20dB.
Absolute maximum power, voltage and current rating: 17V DC.
For Amplifier Selection Guide, please click here.
For Amplifier Environmental Specifications, please click here.
General Quality Control Procedures and Environmental Specifications are given in Mini-Circuits Guarantees Quality.
Hi-Rel, MIL description are given in Hi-Rel and MIL
Prices and Specifications subjects to change without notice.

FREQ
(MHz)
Gain (dB) Directivity (dB) VSWR N.F.
(dB)
Pout(dBm)
(@1dB COMPR)
12.0V 15V 16V 12.0V 15V 16V IN OUT
5.0 16.26 16.25 16.23 5.0 5.0 5.1 1.49 1.57 - 18.30
11.3 16.55 16.58 16.55 4.3 4.3 4.3 1.25 1.25 3.30 18.96
33.4 16.75 16.79 16.76 3.8 3.8 3.8 1.13 1.09 3.27 19.66
98.8 16.74 16.77 16.76 3.5 3.5 3.5 1.11 1.16 3.30 19.68
195.4 16.55 16.59 16.57 2.9 3.0 3.0 1.13 1.35 3.24 19.62
246.2 16.43 16.47 16.46 2.5 2.7 2.7 1.15 1.41 3.24 19.49
309.6 16.27 16.32 16.28 2.2 2.3 2.4 1.18 1.47 3.27 19.24
373.1 16.13 16.19 16.14 1.8 1.9 2.0 1.21 1.45 3.25 19.08
436.5 16.04 16.08 16.04 1.4 1.6 1.7 1.23 1.44 3.26 19.11
500.0 15.92 15.98 15.93 1.1 1.3 1.4 1.24 1.36 3.28 19.25