AMP-76
Frequency
MHz
GAIN, dB Maximum Power, dBm Dynamic Range VSWR DC Power
fL - fU Min. Min.
Flatness
Max.
Flatness
Output
(1 dB
Comp.)
Input
(no
damage)
NF
dB
Typ.
IP3
dBm
Typ.
In
Typ.
Out
Typ.
Cur-
rent
(mA)
Volt(V.)
5.00-500 26 ±0.70 ±1.00 +14 +6.00 3.10 28 2.00 2.00 68 15
Lw=low range(fL to fU/2)  U=upper range(fU/2 to fU)

Pin Connections
Port RF in RF Out DC Case GND Not Used
cd 2 4 1 3 -



Case Style - PP120 (inch,mm )   weight: 1.5 grams.
A B C D E F G H J
.50
12.700
.21
5.334
.150
3.810
.016
0.406
.020
0.508
.04
1.016
.300
7.620
   
K L M N P Q R S T
                 
Tolerance: .x ± .1  .xx ± .03  .xxx ± .015 inch.
Material and Finish:
    Header and lead finish: gold plate per MIL-G-45204. Case material: Nickel
Marking:
    For Pin designations see specification data sheet.

Notes:
Open load is not recommended, potentially can cause damage. With no load, derate max. input power by 20dB.
Absolute maximum power, voltage and current rating: 17V DC.
For Amplifier Selection Guide, please click here.
For Amplifier Environmental Specifications, please click here.
General Quality Control Procedures and Environmental Specifications are given in Mini-Circuits Guarantees Quality.
Hi-Rel, MIL description are given in Hi-Rel and MIL
Prices and Specifications subjects to change without notice.

FREQ
(MHz)
Gain (dB) Directivity (dB) VSWR N.F.
(dB)
Pout(dBm)
(@1dB COMPR)
12.0V 15V 16V 12.5V 15V 16V IN OUT
10.0 26.84 28.02 28.24 9.4 8.8 8.8 1.04 1.32 3.06 16.64
19.3 26.99 28.17 28.37 9.1 8.7 8.6 1.04 1.30 3.01 16.90
46.5 26.99 28.15 28.35 9.3 8.7 8.6 1.07 1.32 2.97 16.83
111.8 26.75 27.90 28.14 9.5 9.1 8.8 1.17 1.37 3.01 16.73
198.5 26.78 27.92 28.12 9.5 9.1 8.9 1.31 1.46 2.96 16.71
248.7 26.89 28.08 28.27 9.6 8.8 8.7 1.38 1.52 3.00 16.70
311.5 26.86 27.98 28.23 9.6 9.0 8.7 1.47 1.61 3.04 16.73
374.4 26.74 27.96 28.19 9.9 8.9 8.7 1.54 1.68 3.12 16.66
437.2 26.55 27.77 27.98 9.9 9.1 8.8 1.58 1.69 3.21 16.55
500.0 26.67 27.96 28.20 9.6 8.4 8.2 1.63 1.69 3.25 16.42