AMP-75
Frequency
MHz
GAIN, dB Maximum Power, dBm Dynamic Range VSWR DC Power
fL - fU Min. Min.
Flatness
Max.
Flatness
Output
(1 dB
Comp.)
Input
(no
damage)
NF
dB
Typ.
IP3
dBm
Typ.
In
Typ.
Out
Typ.
Cur-
rent
(mA)
Volt(V.)
5.00-500 19 ±0.40 ±1.00 +12 +13 2.40 28 2.00 2.00 29 15
Lw=low range(fL to fU/2)  U=upper range(fU/2 to fU)

Pin Connections
Port RF in RF Out DC Case GND Not Used
cd 2 4 1 3 -



Case Style - PP120 (inch,mm )   weight: 1.5 grams.
A B C D E F G H J
.50
12.700
.21
5.334
.150
3.810
.016
0.406
.020
0.508
.04
1.016
.300
7.620
   
K L M N P Q R S T
                 
Tolerance: .x ± .1  .xx ± .03  .xxx ± .015 inch.
Material and Finish:
    Header and lead finish: gold plate per MIL-G-45204. Case material: Nickel
Marking:
    For Pin designations see specification data sheet.

Notes:
Open load is not recommended, potentially can cause damage. With no load, derate max. input power by 20dB.
Absolute maximum power, voltage and current rating: 17V DC.
For Amplifier Selection Guide, please click here.
For Amplifier Environmental Specifications, please click here.
General Quality Control Procedures and Environmental Specifications are given in Mini-Circuits Guarantees Quality.
Hi-Rel, MIL description are given in Hi-Rel and MIL
Prices and Specifications subjects to change without notice.

FREQ
(MHz)
Gain (dB) Directivity (dB) VSWR N.F.
(dB)
Pout(dBm)
(@1dB COMPR)
12.0V 15V 16V 12.0V 15V 16V IN OUT
5.0 20.23 20.44 20.48 4.1 4.2 4.2 1.52 1.59 - 13.88
11.3 20.38 20.59 20.65 3.7 3.7 3.8 1.47 1.47 2.83 14.23
33.4 20.45 20.65 20.72 3.5 3.4 3.5 1.46 1.42 2.81 14.80
98.8 20.38 20.58 20.64 3.3 3.3 3.3 1.40 1.40 2.91 14.90
195.4 20.29 20.49 20.53 2.7 2.7 2.7 1.24 1.40 2.92 14.99
246.2 20.28 20.47 20.52 2.2 2.2 2.2 1.14 1.40 2.94 14.83
309.6 20.25 20.46 20.49 1.8 1.7 1.7 1.05 1.37 2.95 14.51
373.1 20.24 20.44 20.47 1.3 1.3 1.3 1.19 1.30 2.92 14.64
436.5 20.21 20.40 20.45 1.2 1.1 1.1 1.41 1.20 2.98 15.03
500.0 20.08 20.27 20.29 1.4 1.3 1.3 1.79 1.09 3.13 15.57