Figure 3

 

Component Description Part no. Source
LC03-6 6V, bidirectional, low-capacitance TVS diode LC03-6 Semtech
TVS 5V, 600W TVS diode SMBJ5.0 Semtech
TC 4 to 7 ohms positive-temperature-coefficient resistor   Raychem
C1 68-µF capacitor    
C2 1-µF capacitor    
C3 0.1-µF capacitor    
C4 0.47-µF capacitor    
C5 0.1-µF capacitor    
R1, R2 470 ohms, 1/4W, 1% resistor    
R3 100 ohms, 1/2W, 1% resistor    
D1 Surge-protection diode array SPDA04L Semtech
Notes: You can substitute surge-rated fuses and resistors for PTC devices.
You may add resistors to TTIP and TRING to negate the signal-attenuation effect of the line-feed resistors.
This inside-line-protection circuit meets lightning-surge and ac-power-cross requirements.
Back

| EDN Access | Feedback | Table of Contents |


Copyright © 1997 EDN Magazine, EDN Access. EDN is a registered trademark of Reed Properties Inc, used under license. EDN is published by Cahners Publishing Company, a unit of Reed Elsevier Inc.