This section covers ordering information and specification on reflectors, power supplies, shields, filters and eyewear as well as ultraviolet intensity meters.

Custom reflectors can be added to grids and Pen-Ray Lamps to direct and enhance energy output. Contact UVP with your requirements.

Made specifically for the Pen-Ray Lamps, these power supplies provide proper voltage and current for starting and operating the lamps. Mating recommendations are available to provide optimum energy output from, and maximum life span of, the Pen-Ray Lamps.

Pen-Ray Lamps operate on an AC current.  For certain systems it may be desirable to operate the lamp at higher frequencies than 60 Hz.  Pen-Ray Lamps can operate satisfactorily at frequencies from 50 Hz to 3k kHz.

Contact UVP regarding UL/CE Certifications on power supplies.

Model PS-1 Power Supply, Part Number 99-0055-01

99-0055-01 Power Supply

Model PS-5 DC Power Supply Part Number 99-0061-01

99-0062-01 Power Supply

Power Supplies

UV Blocking Eyewear
UV Intensity Meters
Pen-Ray Lamps
Mercury Lamps
Rare Gas Lamps
Zinc/Cadmium Lamps
CP Series Calibration Lamps
PCQ Lamps
Grid Lamps
Ozone Generators
Technical Information
Request Literature
Pen-Ray Home Page

Pen-Ray Power Supplies

Part Number (Model0) Primary Voltage

Secondary Open Circuit Voltage (RMS)

Lamp Current (Nominal)

L x W x H Dimensions

AC Power Supplies

99-0055-01 (PS-1) 115V/60Hz
99-0055-02 (PS-1) 220V/50Hz

2300 Vac

18 mA

6.3 x 3.7 x 2.3"
(160 x 94 x 53 mm)

99-0056-01 (PS-2) 115V/60Hz
99-0056-02 (PS-2) 220V/50Hz

2000 Vac

6 mA

6.3 x 3.7 x 2.3"
(160 x 94 x 53 mm)

99-0057-01 (PS-3) 115V/60Hz
99-0057-02 (PS-3) 220V/50Hz

2100 Vac

10 mA

6.3 x 3.7 x 2.3"
(160 x 94 x 53 mm)

99-0004-01 (PS-4) 115V/60Hz
99-0004-02 PS-4) 220V/50Hz

2800 Vac

26 mA

4.6 x 5.8 x 3.8"
(117 x 147 x 92 mm)

99-0033-01 (PS-9) 115V/60Hz
99-0033-02 (PS-9) 220V/50Hz

2400 Vac

48 mA

5.8 x 4.6 x 3.6"
(147 x 117 x 92 mm)

40-0062-01 (PS-8) 115V/60Hz
40-0062-02 (PS-8) 220V/50Hz

6000 Vac

30 mA

10.1 x 4.0 x 3.4"
(256 x 102 x 86 mm)

DC Power Supplies

44-0002-01 (PS-7)  12VDC/30kHz

1200 Vac

10 mA

1.1 x 2.2 x 0.65"
(28 x 56 x 17 mm)

99-0061-01 (PS-5*) 12VDC/38kHz
99-0062-01 (PS-6*) 24VDC/38kHz
99-0062-03 (PS-10*) 24VDC/38kHz

3500 Vac

18 mA(PS-5);
28 mA(PS-6);
18 mA(PS-10)

3.85 x 3.5 x 1.5"
(98 x 89 x 38 mm)

* User can modify current to the following ranges: PS-5, 15-28 mA; PS-6 and PS-10, 15-48mA.  Cooling fans for power supplies are recommended when using higher current feeds.

Shields and Filters

Filters and Shields

Pen-Ray Filter and Shields, for directing or modifying the emission output, can be ordered for the 11SC-1 Lamp.  Shield A has a 0.04 inch ID hole for a point-like source; Shield B a 0.31 x 0.63" window; Shield C a 0.19 x 1.5" window.  G-275 filter absorbs visible light while transmitting ultraviolet at 254nm.  The G-278 filter converts shortwave radiation to longwave at 365nm.

Shields and Filters

Lamp Shields & Filters

Part Number

Description

Special

 98-0008-01

Lamp Shield A

0.04" (1.02mm) ID

 98-0008-02

Lamp Shield B

0.31" x 0.63" (7.78 x 16mm) window

 98-0008-03

Lamp Shield C

0.19" x 1.5" (4.8 x 38.1mm) window

 98-0017-01

G-275 Filter, SW

Absorbs visible light while transmitting 254nm

 98-0018-01

G-278 Filter, LW

Absorbs shortwave while transmitting longwave

UV Blocking Eyewear and UV Intensity Meters are available. See links above.

Lamp Power Supplies & Accessories

Last updated: 7/02

When sending a Request for Literature, please be sure to include your name, telephone, company and address information along with specifics for products you are interested in. This will assist us in responding to your inquiry.

Corporate Office: UVP, Inc. 2066 W. 11th Street, Upland, CA USA, 91786 * Tel: (800) 452-6788 or (909) 946-3197,  E-mail: uvp@uvp.com;
European Sales Office: Ultra-Violet Products Ltd, Unit 1, Trinity Hall Estate, Nuffield Road, Cambridge, CB4 1TG UK
Tel: 44(0)1223-420022, E-mail: uvp@uvp.co.uk
Comments about this web site: send to uvp@uvp.com © UVP, Inc. 2002