![Home Page](logo-t.gif)
|
#23 |
|
I
Sine Wave Generators
![](sine.gif)
Square Wave Generators
![](square.gif)
Logic Clocks and Oscillators
![](clock.gif)
Flashers
To determine the resistance to be used for the LED current divide the supply voltage by the current required in mA .( 10mA = .01A)
![](flasher.gif)
This circuit is the same as shown above in the Logic Clock but with the supply and LED added. Both IC's can be used and have the same pin connections
![](flash.gif)
|
Home
If you have any comments or questions email me at roma60@home.com
© Laurier Gendron, Burnaby, B.C., Canada. 1998