 |
 |
|
|
|
||||||||||||
| ||||||||||||||||
 | ||||||||||||||||
|
| ||||||||||||||||
| ||||||||||||||||
|
Call 4 LESS! Dial 1-877-CALL-4-LESS Have Feedback? Click Here! Suggest reconnsworld.com to a friend! + Robo: - Electro: EE Projects
Schematics Depot
power
audio
ir/ultrasonic
transmitters
telephone
led's
misc. circuits
+ Webring: + MessageBoard: + Store: + Advertise /w Us: + Link to us: @reconnsworld.com Find Out! How Stuff Works at HowStuffWorks.com 
Click here for the reconnsworld.com privacy statement |
|
|
|
Electronics >> Schematics Depot >> Audio >> sound detector latch
parts:
all resistors are 5 or 10 percent tolerance, 1/4-watt all capacitors are 10 percent tolerance, rated 35 volts or higher for use with the sound detector circuit/electret mike amplifier. when the 555 ic goes into timing mode (triggered by an output signal from the sound detector amplifier,) the timer's output (pin 3) is set into HIGH for a duration set by C2, and R2. adjusting R1 will adjust how long it listens, from 10 seconds all the way down to 2/10ths of a second. this could be used to listen for hand claps.Return to: Schematics Depot, or Audio Circuits |
|
||||||||||
 | | |||||||||||||||