"L" RODS WILL CROSS WHEN YOU INTERSECT " ILINE (S)"

Depth

The RADIUS of the HALO determines the DEPTH and/or SIZE of the treasure

"L" RODS WILL STAY OPEN WHEN NOT ON A "SIGNAL LINE"

How is the procedure using LRL's or LDL's, using dowsing rods….

Instruments

1. Step off about 50 feet from the signal stake with the red clip. While holding one "L" rod in each hand, pointing directly ahead of you, start walking a circle around the Ground Stake. If there is a target within range, your "L" Rods will cross as you reach the "SIGNAL LINE". Place a marker on that spot. Or have someone with a digital compass.
   

2. Step off approximately 50 more feet (100 ft. total from Signal Stake), and repeat the procedure in step 3.
   

3. Repeat this procedure again at an additional 100 feet (200 ft. total from Signal Stake). You have now established your Signal Lines (s).
   

4. On the Signal Line, walk away from the first marker in an "S" pattern (Wavy line). The "L" Rods will open and close each time your intersect the line.
   

5. When you have passed the target, your "L" Rods will remain open. Reverse direction until the "L" Rods close again. You are now on the target! Set a marker.
   

6. The target material will emit "HALO" of energy. The size of the "HALO" will determine depth of the target material. This will be further explained in the following section.
   

HERE'S HOW IT'S DONE