Translation tools from SYSTRAN
Translate your documents within seconds with Try SYSTRAN Personal!
LAST MODIFIED:
Friday, 05-Apr-2002 17:21:33 EST
This is a relative power unit. At audio frequencies a change of one decibel (abbreviated dB) is just detectable as a change in loudness under ideal conditions.
For a given power ratio the decibel change is calculated as:
If we used voltage or current ratios instead then our formula becomes:
The decibel units add and subtract. For example, if we had an amplifier stage with a voltage gain of 22 which from above is 26.85 dB gain, followed by a further amplifier stage which has a voltage gain of 17 (24.6 dB) then the total overall voltage gain is 22 * 17 = 374 (51.46 dB).
Adding together the 26.85 dB plus the 24.6 dB = 51.45 dB, The minor difference was caused by my rounding to the nearesting second decimal place.
I received this email question:
"could you please explain me the difference between db, dbmV and dbmicroV?"
My reply:
I assume you understand decibels, if not:
see http://www.electronics-tutorials.com/basics/decibel.htm [this page]
dBm for example simply is referenced to milli-watts where one milli-watt = 0dBm.
A very common dBm figure is +7dBm where following the decibel rules and dividing +7 by 10 we get 0.7 and the anti-log of that is 5.0118 or five as the nearest whole number.
So +7dBm is another way of saying 5 milli-watts.
The same applies to the other values you mentioned, just different reference levels.
Why use this system? Instead of saying +7dBm why not say 5 milli-watts? There are several reasons:
a) In systems with gains and losses it is far easier to add and subtract the dBm's.
b) With different impedance's throughout circuits, power levels in dBm's remain constant, only the rf voltages and impedance's change.
NEW! - How to link directly to this page
Want to create a page link to me from your site? It couldn't be easier. No HTML knowledge required; even the technophobes can do it. All you need to do is copy and paste, the following code. All links are greatly appreciated; I sincerely thank you for your support.
Copy and paste the following code for a text link:
and it should appear like this:
<a href="http://www.electronics-tutorials.com/basics/decibel.htm
" target="_top">visit Ian Purdie VK2TIP's "Decibel" Page</a>
visit Ian Purdie VK2TIP's "Decibel" Page
This site is hosted at WebWizards.Net for better value.
Please send me your valuable comments and suggestions! Tell your friends, tell a news group, tell your favourite magazine, heck tell the world!
Absolutely essential to keeping abreast of new and updated electronics tutorials is our comments or subscribe to our highly regarded FREE monthly newsletter form. Unsubscribe any time you like. You can view immediate past issues here to see if it is to your liking.
the author Ian C. Purdie, VK2TIP of www.electronics-tutorials.com asserts the moral right to
be identified as the author of this web site and all contents herein. Copyright © 2000, all rights reserved. See copying and links.
These electronic tutorials are provided for individual private use and the author assumes no liability whatsoever for the application, use, misuse, of any of these projects or electronics tutorials that may result in the direct or indirect damage or loss that comes from these projects or tutorials. All materials are provided for free private and public use.
Commercial use prohibited without prior written permission from www.electronics-tutorials.com.
Copyright © 2000, all rights reserved. URL - http://www.electronics-tutorials.com/basics/decibel.htm
Updated 25th July, 2000
webmaster@electronics-tutorials.com
