Antennas
Probably the best DX site in the world
 DX news

Insulated wire or not
QTH Antenna list, May 2000

Richard ?: I almost always see wire antennas made from solid, non-insulated wire. Is there a reason not to use stranded, insulated wire?
Ed Tanton, n4xy: Strength and stretch are the negatives, Richard.
Being stranded, and having insulation, has negligible impact on actual HF/VHF performance.
The insulation does help keep the copper 'fresh, but I have never found that to matter either, personally.
Use what you have, or can get.
If you get an antenna up high enough that strength matters, then you really need to consider copperweld. I don't enjoy replacing broken antennas, and have a lot of 'whip' in my trees, so I pretty much have to use strong (e.g. copperweld) wire.



Dave, nr1dx: The only real draw back that I can see is that insulated wire is heavier per unit length. As such it does put more strain on certain components in the support structure as well as the wire itself.
I have used insulated wire for dipoles, inverted L's , and even Beverages for years with relatively good success. Of late I have changed to the bare copperweld and my antennas tend to survive in wind, ice and snow storms better.
You are correct in that insulated wires antennas are shorter by about 1.5 to 2% at resonance than their bare counterparts.



Carl, km1h: I've had minimal problem with insulated stranded ( not house wire), usually #10 or 12 tinned and 19 strands or more. Stretch has been insignificant.
For serious use between the tops of pine trees I use #12 solid and insulated CopperWeld, also known as rural telephone line wire. The black insulation is known as APS...Anti Percipitation Static and it does a good job in rain or snow. Even then I use a pair of heavy duty door springs to act as shock absorbers.
The worst stuff Ive used for antenna wire is stranded CopperWeld. A few years in NE acid rain and it rots and unravels.



Jay, w6cj: For temporary, or hidden, HF wire antennas I prefer thin, insulated wire.
It works fine for tuner-fed balanced or endfed antennas and will work on plain-old dipoles with coax feed. The slippery insulation (teflon) is best for throwing over or through trees.
It won't snag.



John Matz, kb9ii: Two of my wire antennas are made from insulated solid house wire. A few things I have noted:
Stretch seems negligible, the insulation pulls it low in freq, it's a little heavier, strength is adequate in inverted vee configuration, the insulation can't take the sun and rain and snow around Chicago very well, but it's been up for four years and seems ok.
I used black #14 for minimum visibility.



Carl, km1h: Several asked where to get rural telephone wire that is #12 insulated Copperweld
Since I'm basically lazy, here is a one short reply.
I've bought mine in 1000' to 5000' lots; they will put up on 500' rolls at no charge which makes it nice for group buys.
I purchased the extra high conductivity version....more copper I guess.
I've used it here for Beverages and regular wire antennas that needed strength and percipitation noise reduction.
You can get a catalog from:
Clifford Wire, 1-800-451-4381, in Vermount.
Web site:
http://www.cliffordvt.com/

David Robbins, k1ttt: Just don't ask for Copperweld when you call them, they'll have no idea what you are talking about.
What you are looking for from them is "Line Wire, Single Conductor IMSA spec 28-3". They describe the conductor as 'copperweld' or 'copperply' and the insulation as black hdpe. They have 12ga and 10ga in the catalog I have.
The standard reel length is 5000', but they will cut shorter lengths.
I have been using this stuff for years for beverages, inverted V's, and verticals. it holds up to everything, including ice, trees falling on it, bears flossing with it, and moose running into it.
Front page
Just in!
Latin DX
Andes DX
Medium wave
Solar report
DX links
Antennas
DX lab

 Archive 2001
September
August
July
June
May
April
March
February
January
Archive 2000

 Mail list archive
2001
2000
1999
1998
1997
1996
1995

 Search
Search all HCDX
mail since 1995

 About us
FAQ
HCDX mail list
Our team
Our partners
Write to us


 Our partners
AGDX
Britti-DX

Clandestine

Distance

DXlinks.com

Freeze!

Herman's DX

Nordic DX

QSL info web
SW Bulletin
SWR radio
Tampere DX


How to become
a HCDX partner



antennX   Hide it   Werner's links   Antenna Elmer   Coax basics   Antenna basics