Main Index 1 Mar 2004 @ 08:43:30 UTC Not logged in.  Log In  

could not open /dev/kbd to get keyboard type US keyboard assumed
could not get keyboard type US keyboard assumed
could not open /dev/kbd to get keyboard type US keyboard assumed
could not get keyboard type US keyboard assumed
Subject: YAESU FT767GX mod
Message-ID: <8908221542.AA00047@adam.DG.COM>
From: Kendell_Chilton@dgc.mceo.dg.COM
Date: 22 Aug 89 14:42:58 GMT

I have recently purchased the aforementioned transceiver.  I have had no
problems to speak of and enjoy the rig thoroughly. I would like to
submit the following mod for the rig.  Note that implementation on this
mod is at the rig owner's risk and may violate warranties.  Here is a
description of the mod:

o Remove the bottom cover (8 screws: 4 underneath, 2 on each side)
o Remove the plastic rear panel.  (Just a cosmetic piece)
o Remove the rear metal panel.  (So many screws)
o Loosen the "hinge" screws on the front bottom.  There are 4 of them.
o Lift the now loose card tray to expose to inner circuit boards.  Be
  careful!  There are two power supply lines that need to be disconnected.
  (Remember to reconnect them on assembly.)  (one is the control board,
  the other the one we want.)  Note that the board we will mod is the same
  one that has the switch that allows changing the tuning dial from
  5kHz/rev to 10kHz/rev.
o Change the position of switch S01.  The rig will now transmit from 1.5
  to 29.99999 MHz.
o Reverse the disassembly procedure.

Well that's it.  You are now ready for any band addition that may come
our way.  If you have problems, reply; I'll try to answer your
questions.
       73s de KA1TIH :   Kendell_Chilton@dgc.mceo.dg.com (Ken Chilton)
 
 
 From mbrinkho@inetnebr.com Thu Dec  7 11:25 MST 1995
 From: "Matt C. Brinkhoff" 


 This modification is intended for use with the Yaesu FT767GX when equipped
 with the optional 2 Meter module.

 It appears that Yaesu has the 2 Meter module default to Japanese 2M freqs
 (144.000-145.9999MHz).  After using the backup switch to reset memories on 
 the 767, the 2M module will also reset to default.

 To restore full US 2M band coverage (144.0000-147.9999MHz), follow this
 procedure:

 1) place "backup" switch on rear panel to OFF position
 2) power OFF radio
 3) hold down "2" key and power ON radio
 4) return backup switch to ON position

 Although I can't imagine that you could possibly break your radio with this
 mod, standard disclaimers for radio modifications apply.

 -- 
 Matt C. Brinkhoff, KB0RXC
 mbrinkho@inetnebr.com
 Lincoln, Nebraska [EN10]


Copied from the QRZ! Windows Ham Radio CDROM

 

Return to the mods-e-h file section.