|
From: "Silliman, Keith"
Subject: Icom IC-V8 manual correction
Date: Thu, 18 Jul 2002 05:54:40 -0400
The instructions for "Programming the memory/call channels" on page 25
are missing a critical step. Insert the following step between 3 and
4: Push Afunc then Cmr momentarily. Then use arrows (or dial) to
sllect the memory channel to program.
This is not reallya mod, but could save someone a couple of frustrating
hours. Icom tech support is aware of this omission.
73,
Keith. KB2PE
--------------------------
Keith Silliman, Director
Niagara Relicensing
New York Power Authority
Return to
the mods-i-k file section.
|