VNA-25
Frequency
MHz		 GAIN, dB Maximum Power, dBm Dynamic Range VSWR Absolute
Maximum
Rating		 DC Power Thermal
resistance
Øjc
°C/W
fL - fU Min. Output
(1 dB
Comp.)		 Input
(no
damage)		 NF
dB
Typ.		 IP3
dBm
Typ.		 In
Typ.		 Out
Typ.		 I
(mA)		 P
(mW)		 Cur-
rent
(mA)		 Volt(V.)
500-2500 11.50 +18.20 +10.00 5.50 27.00 1.50 1.60 105.00 1000.00 85.00 5.00 125.00
Lw=low range(fL to fU/2)  U=upper range(fU/2 to fU)

Pin Connections
Port RF in RF Out DC Case GND Not Used
hj 3 6 1 2,4,5,7,8 -



Case Style - XX211 (inch,mm )   weight: 0.1 grams.
A B C D E F G H J
.163
4.140		 .202
5.131		 .077
1.956		 .25
6.350		 .22
5.588		 .050
1.270		 .017
0.432		 .009
0.229		 .025
0.635
K L M N P Q R S T
.03
0.762		   .050
1.270		 .03
0.762		 .270
6.858		        
Tolerance: .x ± .1  .xx ± .03  .xxx ± .015 inch.
Material and Finish:
    Case material: plastic. Lead Finish: tin-lead plate.
Special Tolerances:
    Lead width ±.010; lead thickness ±.005 inch.
Packaging:

Packaging information:
Tape Width(mm): 12
Reel Size(inches): 7
Device Cavity Pitch(mm): 8
Devices Per Reel: 1000,2500

 Notes:
• Minimum gain at highest frequency. Full temperature range, except room temperature for Dash-4 models.
• Frequency at which output power, NF and IP3 are specified: 1000 MHz.
• Thermal resistance Øjc is from hottest junction in the device to the mounting surface of the leads.
• Model number designated by alphanumeric code marking.
• Permanent damage may occur if any of these limits are exceeded. These ratings are not intended for continuous normal operation.
• For Amplifier Selection Guide, please click here.
For Amplifier Environmental Specifications, please click here.
• For Surface Mount Environmental Specifications, please click here.
Re-flow soldering information is available in "Surface Mount" article.
• Low frequency cutoff determined by external coupling capacitors.
• VSWR input typ: Increases below 1500 MHz.
• Max. Voltage 7V at pin 1 (DC power). Max. voltage 10V at pins 3,6, DC or transient.
• For VNA-25, 1000 devices per 7" reel or 2500 devices per 13" reel.
• Non-hermetic
• Prefix letter (optional) designates assembly location.
• Reliability predictions and normal operation conditions are applicable at current specified.
• General Quality Control Procedures and Environmental Specifications are given in Mini-Circuits Guarantees Quality.
Hi-Rel, MIL description are given in Hi-Rel and MIL
• Prices and Specifications subjects to change without notice.

FREQ
(MHz)		 S11 (Input Return Loss) S21 (Power Gain) S12 (Isolation Out-in) S22 (Output Return Loss)
dB Mag Ang dB Ang dB Mag Ang dB Mag Ang
500.00 -2.00 0.77 -110.00 14.00 22.00 -38.00 0.01 83.00 -16.00 0.16 12.00
700.00 -5.00 0.54 -144.00 16.00 -48.00 -39.00 0.01 -17.00 -15.00 0.19 -77.00
1000.00 -10.00 0.33 92.00 18.00 -132.00 -40.00 0.01 -72.00 -13.00 0.22 -150.00
1200.00 -12.00 0.25 157.00 18.00 152.00 -40.00 0.01 -98.00 -13.00 0.21 -164.00
1500.00 -15.00 0.18 126.00 19.00 102.00 -41.00 0.01 -130.00 -15.00 0.19 92.00
1800.00 -20.00 0.10 85.00 18.00 30.00 -40.00 0.01 -141.00 -16.00 0.17 7.00
2100.00 -26.00 0.05 -49.00 18.00 -39.00 -38.00 0.01 -127.00 -15.00 0.18 -82.00
2500.00 -16.00 0.15 149.00 16.00 -127.00 -34.00 0.02 134.00 -14.00 0.20 -107.00
2800.00 -13.00 0.23 117.00 14.00 135.00 -33.00 0.02 93.00 -14.00 0.20 145.00
3000.00 -11.00 0.28 86.00 13.00 131.00 -32.00 0.03 63.00 -15.00 0.18 112.00