Configuration Type:
TC4-11

RATIO
Frequency
MHz
Insertion Loss Case
Style
Conn-
ection
3 dB
MHz
2 dB
MHz
1 dB
MHz
4.00 2.00-1100  -  2.00-1100 5.00-700 AT224 kp

Pin Connections
Port Primary
Dot
Primary Primary
CT
Second-
ary Dot
Second-
ary
Second-
ary CT
Gnd
Ext.
Case
Gnd
Not
Used
kp 1 3 - 6 3 - - - -



Case Style - AT224 (inch,mm )   weight: 0.15 grams.
A B C D E F G H J
.150
3.810
.150
3.810
.150
3.810
.050
1.270
.030
0.762
.025
0.635
.028
0.711
.065
1.651
.190
4.826
K L M N P Q R S T
.030
0.762
               
Tolerance: .x ± .1  .xx ± .03  .xxx ± .015 inch.
Material and Finish:
    Open-style, ceramic base. Termination finish: solder plate over nickel.
Packaging:

Packaging information:
Tape Width(mm): 12
Reel Size(inches): 13
Device Cavity Pitch(mm): 8
Devices Per Reel: 1000(3)

Notes:
Absolute power, voltage and current ratings:
RF input power: 0.25 Watt rating
DC current, 30mA.
Operating temperature range is -20°C to +85°C.
Impedance ratio = secondary/primary
For Surface Mount Environmental Specifications, please click here.
Re-flow soldering information is available in "Surface Mount" article.
Non-hermetic
Stepdown, 50 ohm primary, 5.2 pF across secondary.
Insertion loss referenced to mid-band loss
General Quality Control Procedures and Environmental Specifications are given in Mini-Circuits Guarantees Quality.
Hi-Rel, MIL description are given in Hi-Rel and MIL
Prices and Specifications subjects to change without notice.