MAN-2
Frequency
MHz
GAIN, dB Maximum Power, dBm Dynamic Range VSWR DC Power
fL - fU Min. Max.
Flatness
Lw U Input
(no
damage)
NF
dB
Typ.
IP3
dBm
Typ.
In
Typ.
Out
Typ.
Cur-
rent
(mA)
Volt(V.)
1.00-1000 18 ±1.50 +9.00 +7.00 +15 6.00 19 1.80 1.80 85 12
Lw=low range(fL to fU/2)  U=upper range(fU/2 to fU)

Pin Connections
Port RF in RF Out DC Case GND Not Used
cc 1 8 5 2,3,4,6 7



Case Style - A05 (inch,mm )   weight: 3.7 grams.
A B C D E F G H J
.770
19.558
.800
20.320
.240
6.096
.250
6.350
.370
9.398
.400
10.160
.200
5.080
.20
5.080
.14
3.556
K L M N P Q R S T
.031
0.787
               
Tolerance: .x ± .1  .xx ± .03  .xxx ± .015 inch.
Material and Finish:
    Header material: C.R.S. Pin material: #52 alloy. Finish: electro tin, hot-oil flowed. Cover material:upro-nickel.
Mounting:
    Insulated spacer available. Request P/N B14-045-01.
    Pin's meniscus (of header): 0.015" max.
Special Tolerances:
    Pin diameter ±.005 inch.

Notes:
Open load is not recommended, potentially can cause damage. With no load, derate max. input power by 20dB.
Absolute maximum power, voltage and current rating: 12.5V DC.
For Amplifier Selection Guide, please click here.
For Amplifier Environmental Specifications, please click here.
General Quality Control Procedures and Environmental Specifications are given in Mini-Circuits Guarantees Quality.
Hi-Rel, MIL description are given in Hi-Rel and MIL
Prices and Specifications subjects to change without notice.

FREQ
(MHz)
Gain (dB) Directivity (dB) VSWR N.F.
(dB)
Pout(dBm)
(@1dB COMPR)
11.0V 12.0V 12.5V 11.0V 12.0V 12.5V IN OUT
0.50 20.16 20.56 20.71 17.5 17.3 17.1 1.61 1.77 - 9.12
2.2 21.09 21.48 21.63 16.9 16.5 16.6 1.16 1.11 - 9.45
16.6 21.15 21.54 21.70 16.7 16.5 16.3 1.05 1.02 6.40 9.56
122.7 21.13 21.55 21.66 16.6 16.4 16.2 1.04 1.02 6.32 9.46
384.9 20.98 21.37 21.48 16.5 16.1 16.0 1.00 1.08 6.44 9.33
487.4 20.88 21.24 21.39 16.2 15.9 15.8 1.02 1.12 6.47 9.31
615.6 20.62 20.96 21.09 16.2 16.0 15.9 1.05 1.17 6.50 9.42
743.7 20.28 20.61 20.69 15.6 15.2 15.3 1.07 1.23 6.49 9.34