LRDC-12-1-75J
Frequency
MHz
Coupling
dB
Mainline Loss
dB
Directivity
dB
VSWR
(:1)
Power
INPUT, W
fL - fU Nom. Flatness L
Typ.  Max.
M
Typ.  Max.
U
Typ.  Max.
L
Typ.  Min.
M
Typ.  Min.
U
Typ.  Min.
Typ. L
Max.
MU
Max
5.00-600 12.2±0.60 ±0.6 0.40  0.80 0.50  1.00 0.80  1.50 20  17 21  18 20  12 1.30 1.0 1.0
L=low range(fL to 10fL)  M=mid range(10fL to fU/2)  U=upper range(fU/2 to fU)

Pin Connections
Port Input Output Coupled
(forward)
Coupled
(reverse)
cz 6 1 4 -
Not Used Case GND Termination GND  
3 - - 2,5  



Case Style - QQQ569 (inch,mm )   weight: 0.5 grams.
A B C D E F G H J
  .31
7.874
.225
5.715
    .100
2.540
.045
1.143
.390
9.906
.420
10.668
K L M N P Q R S T
.120
3.048
.060
1.524
.100
2.540
           
Tolerance: .x ± .1  .xx ± .03  .xxx ± .015 inch.
Material and Finish:
    Case material: ceramic, Lead finish: solder plate.
Packaging:

Packaging information:
Tape Width(mm): 32
Reel Size(inches): 13
Device Cavity Pitch(mm): 16
Devices Per Reel: 500

Notes:
Aqueous washable. For non-aqueous requirements, LRDC units available in case style QQQ130.
Denotes 75 ohm models.
Mainline Loss includes theoretical power loss at coupled port.
For Surface Mount Environmental Specifications, please click here.
Re-flow soldering information is available in "Surface Mount" article.
General Quality Control Procedures and Environmental Specifications are given in Mini-Circuits Guarantees Quality.
Hi-Rel, MIL description are given in Hi-Rel and MIL
Prices and Specifications subjects to change without notice.

FREQ
(MHz)
I. Loss (dB)
In-Out
Coupling (dB)
In-CPL
Directivity (dB) Return Loss (dB)
In Out CPL
5.00 0.67 12.50 19.87 30.72 21.77 19.63
47.14 0.65 12.43 20.25 34.25 22.38 20.75
89.28 0.69 12.48 20.23 28.28 21.81 20.01
131.42 0.70 12.49 20.11 25.05 21.05 19.08
215.71 0.79 12.60 19.86 20.96 19.31 17.23
300.00 0.85 12.68 19.60 18.05 17.95 15.81
385.71 0.94 12.80 19.29 16.92 17.15 14.76
471.42 1.01 12.91 19.42 16.21 17.17 14.18
557.14 1.14 13.08 19.81 15.93 17.96 13.89
600.00 1.20 13.18 20.13 16.05 18.88 13.87