Notes:
For Surface Mount Environmental Specifications, please click here.
Re-flow soldering information is available in "Surface Mount" article.
Internal load dissipation: 0.125 Watt.
Matched power rating: 0.5 Watt.
Non-hermetic.
When only specification for M range given, specification applies to entire frequency range.
General Quality Control Procedures and Environmental Specifications are given in Mini-Circuits Guarantees Quality.
Hi-Rel, MIL description are given in Hi-Rel and MIL
Prices and Specifications subjects to change without notice.

AMT-2   2 Way-0/180°
Frequency
MHz
Isolation, dB Insertion Loss, dB
Above 3.0dB
Phase
Unbalance
Degrees
Amplitude
Unbalance, dB
Power
Input, W
fL - fU L
Typ.  Min.
M
Typ.  Min.
U
Typ.  Min.
L
Typ.  Max.
M
Typ.  Max.
U
Typ.  Max.
L
Max.
M
Max.
U
Max.
L
Max.
M
Max.
U
Max.
as Combiner
Max.
as Splitter
Max.
50-200       35  20             0.80  1.20           2.00     0.30     0.50
L=low range(fL to 10fL)  M=mid range(10fL to fU/2)  U=upper range(fU/2 to fU)

Pin Connections
Port Sum Port Port 1 Port 2 Port J Gnd Ext
ls 3 6 4 1 2,5



Case Style - CD636 (inch,mm )   weight: 0.45 grams.
A B C D E F G H J
.280
7.112
.310
7.874
.220
5.588
.100
2.540
.162
4.115
.055
1.397
.100
2.540
.030
0.762
 
K L M N P Q R S T
.065
1.651
.300
7.620
             
Tolerance: .x ± .1  .xx ± .03  .xxx ± .015 inch.
Material and Finish:
    Case material: plastic. Lead finish: solder plate.
Packaging:

Packaging information:
Tape Width(mm): 16
Reel Size(inches): 13
Device Cavity Pitch(mm): 12
Devices Per Reel: 1000