AMP-15
Frequency
MHz
GAIN, dB Maximum Power, dBm Dynamic Range VSWR DC Power
fL - fU Min. Min.
Flatness
Max.
Flatness
Output
(1 dB
Comp.)
Input
(no
damage)
NF
dB
Typ.
IP3
dBm
Typ.
In
Typ.
Out
Typ.
Cur-
rent
(mA)
Volt(V.)
5.00-1000 13 ±0.60 ±1.20 +8.00 +13 2.80 22 2.00 2.00 29 15
Lw=low range(fL to fU/2)  U=upper range(fU/2 to fU)

Pin Connections
Port RF in RF Out DC Case GND Not Used
cd 2 4 1 3 -



Case Style - PP120 (inch,mm )   weight: 1.5 grams.
A B C D E F G H J
.50
12.700
.21
5.334
.150
3.810
.016
0.406
.020
0.508
.04
1.016
.300
7.620
   
K L M N P Q R S T
                 
Tolerance: .x ± .1  .xx ± .03  .xxx ± .015 inch.
Material and Finish:
    Header and lead finish: gold plate per MIL-G-45204. Case material: Nickel
Marking:
    For Pin designations see specification data sheet.

Notes:
Open load is not recommended, potentially can cause damage. With no load, derate max. input power by 20dB.
Absolute maximum power, voltage and current rating: 17V DC.
For Amplifier Selection Guide, please click here.
For Amplifier Environmental Specifications, please click here.
General Quality Control Procedures and Environmental Specifications are given in Mini-Circuits Guarantees Quality.
Hi-Rel, MIL description are given in Hi-Rel and MIL
Prices and Specifications subjects to change without notice.

FREQ
(MHz)
Gain (dB) Directivity (dB) VSWR N.F.
(dB)
Pout(dBm)
(@1dB COMPR)
12.0V 15V 16V 12.0V 15V 16V IN OUT
5.0 15.10 15.34 15.38 5.9 5.8 5.8 1.32 1.51 - 11.17
13.2 15.09 15.34 15.37 5.8 5.8 5.8 1.31 1.51 3.27 11.15
48.2 15.05 15.30 15.34 5.8 5.8 5.7 1.30 1.48 3.23 11.24
176.2 14.96 15.18 15.24 5.5 5.4 5.4 1.27 1.34 3.31 11.01
387.7 14.82 14.99 15.03 4.9 4.8 4.8 1.37 1.18 3.19 10.62
489.7 14.74 14.88 14.89 5.0 4.9 5.0 1.56 1.42 3.21 11.06
617.3 14.82 14.90 14.88 5.0 5.1 5.2 1.85 1.75 3.26 12.39
744.9 15.22 15.28 15.27 4.5 4.6 4.8 1.99 1.89 3.00 14.22
872.4 15.44 15.58 15.60 3.5 3.6 3.7 1.60 1.47 2.95 15.82
1000.0 14.83 14.96 14.96 3.2 3.3 3.3 1.40 1.39 3.07 15.12