The decibel is a relative power unit. At audio frequencies a change of one decibel, abbreviated dB, is just detectable as a change in loudness under ideal conditions.

www.electronics-tutorials.com



IC Op-Amp Cookbook

Google
Search WWW Search www.electronics-tutorials.com

This site is hosted at WebWizards.Net for better value.

Don't leave this valuable site without visiting my book shop to see my recommendations. This helps keep this site FREE for everyone.

recommend this page to a friend
 

you can have this page translated /vous pouvez faire traduire ces pages /Sie können lassen diese Seiten übersetzen /potete fare queste tradurre pagine /você pode ter estas páginas traduzido /usted puede hacer estas paginaciones traducir

LAST MODIFIED:
Monday, 27-Aug-2001 22:39:12 EDT

DECIBEL


What is a Decibel?

This is a relative power unit. At audio frequencies a change of one decibel (abbreviated dB) is just detectable as a change in loudness under ideal conditions.

For a given power ratio the decibel change is calculated as:

dB = 10 log P2/P1

If we used voltage or current ratios instead then our formula becomes:

dB = 20 log V2/V1

Examples of using the Decibel

The decibel units add and subtract. For example, if we had an amplifier stage with a voltage gain of 22 which from above is 26.85 dB gain, followed by a further amplifier stage which has a voltage gain of 17 (24.6 dB) then the total overall voltage gain is 22 * 17 = 374 (51.46 dB).

Adding together the 26.85 dB plus the 24.6 dB = 51.45 dB, The minor difference was caused by my rounding to the nearesting second decimal place.

What is dBm for example

I received this email question:

"could you please explain me the difference between db, dbmV and dbmicroV?"

My reply:

I assume you understand decibels, if not:

see http://www.electronics-tutorials.com/basics/decibel.htm [this page]

dBm for example simply is referenced to milli-watts where one milli-watt = 0dBm.

A very common dBm figure is +7dBm where following the decibel rules and dividing +7 by 10 we get 0.7 and the anti-log of that is 5.0118 or five as the nearest whole number.

So +7dBm is another way of saying 5 milli-watts.

The same applies to the other values you mentioned, just different reference levels.

Why use this system? Instead of saying +7dBm why not say 5 milli-watts? There are several reasons:

a) In systems with gains and losses it is far easier to add and subtract the dBm's.
b) With different impedance's throughout circuits, power levels in dBm's remain constant, only the rf voltages and impedance's change.

Hope this helps

Link to this page

NEW! - How to link directly to this page

Want to create a page link to me from your site? It couldn't be easier. No HTML knowledge required; even the technophobes can do it. All you need to do is copy and paste, the following code. All links are greatly appreciated; I sincerely thank you for your support.

Copy and paste the following code for a text link:

<a href="http://www.electronics-tutorials.com/basics/decibel.htm " target="_top">visit Ian Purdie VK2TIP's "Decibel" Page</a>

and it should appear like this:
visit Ian Purdie VK2TIP's "Decibel" Page

 
 
 

Innovative Products For Kids and Adults

This site is hosted at WebWizards.Net for better value.

CARE TO BE A PRACTICAL SUPPORTER OF THIS SITE?

As you would imagine maintaining this site costs me considerable sums of money in many, many ways. If you believe this site is a valuable and FREE educational resource and, YOU want to keep it that way, then here's how YOU can demonstrate your very practical support for this site..

Thanks to these fine folks making voluntary donations, ensuring this site and our Newsletter remains FREE. Could YOU be listed here for your small contribution in return for your FREE education?. Our grateful thanks.
 

rate this page for me

recommend this page to a friend

Please send me your valuable comments and suggestions! Tell your friends, tell a news group, tell your favourite magazine, heck tell the world!

Absolutely essential to keeping abreast of new and updated electronics tutorials is our comments or subscribe to our highly regarded FREE monthly newsletter form. Unsubscribe any time you like. You can view immediate past issues here to see if it is to your liking.
 

the author Ian C. Purdie, VK2TIP of www.electronics-tutorials.com asserts the moral right to be identified as the author of this web site and all contents herein. Copyright © 2000, all rights reserved. See copying and links. These electronic tutorials are provided for individual private use and the author assumes no liability whatsoever for the application, use, misuse, of any of these projects or electronics tutorials that may result in the direct or indirect damage or loss that comes from these projects or tutorials. All materials are provided for free private and public use.
Commercial use prohibited without prior written permission from www.electronics-tutorials.com.


Copyright © 2000, all rights reserved. URL - www.electronics-tutorials.com/basics/decibel.htm

Updated 25th July, 2000

webmaster@electronics-tutorials.com




Click Here!