Coil forms are used to hold a specified number of turns on a specified diameter former. The coil form may or may not be used in conjunction with a coil form "tuning slug". A tuning slug in a coil form leads to greater inductance with fewer turns. Very good examples of coil forms surrounded by metal shields are the I.F. cans in AM / FM Radio Receivers.

www.electronics-tutorials.com



High Speed Digital Design: A Handbook of Black Magic

Google
Search WWW Search www.electronics-tutorials.com

This site is hosted at WebWizards.Net for better value.

Don't leave this valuable site without visiting my book shop to see my recommendations. This helps keep this site FREE for everyone.

recommend this page to a friend
 

you can have this page translated /vous pouvez faire traduire ces pages /Sie können lassen diese Seiten übersetzen /potete fare queste tradurre pagine /você pode ter estas páginas traduzido /usted puede hacer estas paginaciones traducir

COIL FORMS


What are coil forms?

Coil forms are used to hold a specified number of turns on a specified diameter former. The coil form may or may not be used in conjunction with a coil form "tuning slug". A tuning slug in a coil form leads to greater inductance with fewer turns.

Very good examples of coil forms surrounded by metal shields are the I.F. cans in AM / FM Radio Receivers as in figure 1 below.

coil forms surrounded by metal shields

Figure 1 - coil forms surrounded by metal shields

The shielded coil forms are indicated by "OSC" for the oscillator inductor and the "IFT" cans are the IF transformers tuned to 455 Khz. These shielded coil forms used as the IF transformers (IFT) probably have something like 140 turns wound on the primary which is a relatively tiny coil form and would yield an inductance of around 680 uH at a reasonable "Q".

Some other examples of these coil forms with and without the metal shield are in figure 2 below.

coil forms with and without the metal shield

Figure 2 - coil forms with and without the metal shield

I can't remember now where I found this photo. These coil forms are numbered from 1 through 5. Number 1 is a coil form with a tuning slug (often called a "screw core" or "threaded core") and surrounded by a "cup core" to give increased inductance. By screwing the tuning slug in and out we are able to get wide variations in inductance. One example of these type of coil forms, sometimes also called "variable inductors" might be a former and cup core combination which produces say a nominal inductance of 68 uH per 100 turns over the frequency range of 1 to 10 Mhz.

If we wanted 12 uH at 5 Mhz we might select this combination of screw core and cup core. To determine the number of turns required we take 90% of the AL / 100 turns factor (i.e. 90% of the 68 uH = 61.2) To calculate the turns required we take the square root of our desired inductance (12 uH) divided by the AL (61.2) or (SQRT [ 12 / 61.2]) = 0.4428 which is then multiplied by 100 to give us 44.28 turns. Therefore we would wind 44 turns on our former. The tuning slug or "screw core", "threaded core" could give us an inductance variation of as much as 1.5 : 1

Number 2 could simply be number 1 enclosed in a metal shield (copper) to prevent interaction with adjacent components. Number 3 simply has a plastic cup core to protect the windings, it would have a dramatically reduced value of inductance in the absence of a magnetic cup core. Numbers 4 and 5 have no cup cores at all. I'm not even certain number 5 has a screw core.

These are simply a few examples of the hundreds of sizes and possible variations available.

See related topics and links below.

Link to this page

NEW! - How to link directly to this page

Want to create a page link to me from your site? It couldn't be easier. No HTML knowledge required; even the technophobes can do it. All you need to do is copy and paste, the following code. All links are greatly appreciated; I sincerely thank you for your support.

Copy and paste the following code for a text link:

<a href="http://www.electronics-tutorials.com/basics/coil-forms.htm " target="_top">visit Ian Purdie VK2TIP's "Coil Forms" Page</a>

and it should appear like this:
visit Ian Purdie VK2TIP's "Coil Forms" Page

 
 
 

Innovative Products For Kids and Adults

This site is hosted at WebWizards.Net for better value.

CARE TO BE A PRACTICAL SUPPORTER OF THIS SITE?

As you would imagine maintaining this site costs me considerable sums of money in many, many ways. If you believe this site is a valuable and FREE educational resource and, YOU want to keep it that way, then here's how YOU can demonstrate your very practical support for this site..

Thanks to these fine folks making voluntary donations, ensuring this site and our Newsletter remains FREE. Could YOU be listed here for your small contribution in return for your FREE education?. Our grateful thanks.
 

rate this page for me

recommend this page to a friend

Please send me your valuable comments and suggestions! Tell your friends, tell a news group, tell your favourite magazine, heck tell the world!

Absolutely essential to keeping abreast of new and updated electronics tutorials is our comments or subscribe to our highly regarded FREE monthly newsletter form. Unsubscribe any time you like. You can view immediate past issues here to see if it is to your liking.
 

Related topics on inductance

1. audio transformers

2. chokes

3. toroids

4. inductive reactance

5. mobius winding techniques

6. power supply transformers

7. wide band rf transformers

8. Coilcraft Home Page

9. TOKO variable moulded coils




the author Ian C. Purdie, VK2TIP of www.electronics-tutorials.com asserts the moral right to be identified as the author of this web site and all contents herein. Copyright © 2000, all rights reserved. See copying and links. These electronic tutorials are provided for individual private use and the author assumes no liability whatsoever for the application, use, misuse, of any of these projects or electronics tutorials that may result in the direct or indirect damage or loss that comes from these projects or tutorials. All materials are provided for free private and public use.
Commercial use prohibited without prior written permission from www.electronics-tutorials.com.


Copyright © 2000 - 2001, all rights reserved. URL - www.electronics-tutorials.com/basics/coil-forms.htm

Updated 6th May, 2001

webmaster@electronics-tutorials.com




Click Here!