In the topic current we learnt of the unit of measuring electrical quantity or charge was a coulomb. Now a capacitor (formerly condenser) has the ability to hold a charge of electrons. The number of electrons it can hold under a given electrical pressure (voltage) is called its capacitance or capacity. Two metallic plates separated by a non-conducting substance between them make a simple capacitor. Here is the symbol of a capacitor in a pretty basic circuit charged by a battery

www.electronics-tutorials.com



The Home Workshop Spy

Google
Search WWW Search www.electronics-tutorials.com

This site is hosted at WebWizards.Net for better value.

Don't leave this valuable site without visiting my book shop to see my recommendations. This helps keep this site FREE for everyone.

recommend this page to a friend
 

you can have this page translated /vous pouvez faire traduire ces pages /Sie können lassen diese Seiten übersetzen /potete fare queste tradurre pagine /você pode ter estas páginas traduzido /usted puede hacer estas paginaciones traducir

LAST MODIFIED:
Monday, 27-Aug-2001 22:39:00 EDT

CAPACITANCE


What is capacitance?

In the topic current we learnt of the unit of measuring electrical quantity or charge was a coulomb. Now a capacitor (formerly condenser) has the ability to hold a charge of electrons.

The number of electrons it can hold under a given electrical pressure (voltage) is called its capacitance or capacity. Two metallic plates separated by a non-conducting sunstance between them make a simple capacitor. Here is the symbol of a capacitor in a pretty basic circuit charged by a battery.

capacitor schematic in a circuit

Figure 1. - capacitor schematic in a circuit

In this circuit when the switch is open the capacitor has no charge upon it, when the switch is closed current flows because of the voltage pressure, this current is determined by the amount of resistance in the circuit. At the instance the switch closes the emf forces electrons into the top plate of the capacitor from the negative end of the battery and pulls others out of the bottom plate toward the positive end of the battery.

Two points need to be considered here. Firstly as the current flow progresses more electrons flow into the capacitor and a greater opposing emf is developed there to oppose further current flow, the difference between battery voltage and the voltage on the capacitor becomes less and less and current continues to decrease. When the capacitor voltage equals the the battery voltage no further current will flow.

The second point is if the capacitor is able to store one coulomb of charge at one volt it is said to have a capacitance of one Farad. This is a very large unit of measure. Power supply capacitors are often in the region of 4,700 uF or 4,700 / millionths of a Farad. Radio circuits often have capacitances down to 10 pF which is 10 / million, millionths of a Farad.

The unit uF stands for micro-farad (one millionth) and pF stands for pico-farad (one million, millionths). These are the two common values of capacitance you will encounter in electronics.

Time constant of capacitance

The time required for a capacitor to reach its charge is proportional to the capacitance value and the resistance value.

The time constant of a resistance - capacitance circuit is:

T = R X C

where T = time in seconds
where R = resistance in ohms
where C = capacitance in farads

The time in this formula is the time to acquire 63% of the voltage value of the source. It is also the discharge time if we were discharging the capacitance. Should the capacitance in the figure above be 4U7 (4.7 uF) and the resistance was 1M ohms (one meg-ohm or 1,000,000 ohms) then the time constant would be T = R X C = [1,000,000 X 0.000,0047] = 4.7 seconds. These properties are taken advantage of in crude non critical timing circuits.

Capacitors in series and parallel

Capacitors in parallel ADD together as C1 + C2 + C3 + ..... While capacitors in series REDUCE by:

1 / (1 / C1 + 1 / C2 + 1 / C3 + .....)

Consider three capacitors of 10, 22, and 47 uF respectively.

Added in parallel we get 10 + 22 + 47 = 79 uF. While in series we would get:

1 / (1 / 10 + 1 / 22 + 1 / 47) = 5.997 uF.

Note that the result is always LESS than the original lowest value.

Simplified calculations for Capacitors

We said above that parallel combinations simply add the values together. Series combinations are somewhat more difficult requiring 1 / (1 / C1 + 1 / C2 + 1 / C3 + ...).

This can be simplified somewhat to:

[(C1 X C2) / (C1 + C2)]

Try three or more in series. Do the first two then arrive at an intermediate value, then do the third with the intermediate value and so on.

What is even more difficult is if you need to use a series combination to get down from a known value capacitor to a desired net value of capacitance. In that case use this formula:

[(C1 X C2) / (C1 - C2)]

As one example, if you have a 220 pF fixed capacitor but need a net value of about 68 pF:

[(220 X 68) / (220 - 68)] = 98.4 pF (use 100 pF)

Again try three or more in series. Do the first two then arrive at an intermediate value, then do the third with the intermediate value and so on.

Remember low value capacitors are 5% tolerance and higher values are likely 10% so don't get too paranoid with precision calculations. As an exercise play around with 18 pF ±5% tolerance and 82 pF ±10% tolerance using both extreme ends of tolerance as well as their nominal values. When we come to electrolytic capacitors the tolerance is often + 80% / - 20% and require a DC polarization. Helps to keep things in a proper perspective.

capacitors in series and in parallel

Figure 2. - capacitors in series and in parallel

A very important property of Capacitors

Capacitors will pass AC currents but not DC. Throughout electronic circuits this very important property is taken advantage of to pass ac or rf signals from one stage to another while blocking any DC component from the previous stage.

capacitors passing ac blocking dc

Figure 3 - capacitors passing ac blocking dc

What do capacitors look like?

In figure 4 we have a photo of a selection of fixed and variable capacitors. The upper capacitor is a variable capacitor. Down the left hand side we have a number of electolytic capacitors.

a selection of fixed and variable capacitors

Figure 4 - a selection of fixed and variable capacitors

The red capacitor in the lower left is a tag tantalum type of greater tolerance and high stability. The yellow is a metallised polypropylene film type while the green ones at the right are the popular polyester types "Greencaps".

In the middle are silver mica capacitors which I personally think are somewhat over rated although these were 1% tolerance types. At the upper right is a 25 pF beehive trimmer.

Should your budget allow, consider building an LC meter kit to be able to measure either the inductance of your chokes, inductors or even check the capacitance of capacitors.

Link to this page

NEW! - How to link directly to this page

Want to create a page link to me from your site? It couldn't be easier. No HTML knowledge required; even the technophobes can do it. All you need to do is copy and paste, the following code. All links are greatly appreciated; I sincerely thank you for your support.

Copy and paste the following code for a text link:

<a href="http://www.electronics-tutorials.com/basics/capacitance.htm" target="_top">visit Ian Purdie VK2TIP's Capacitance Page</a>

and it should appear like this:
visit Ian Purdie VK2TIP's Capacitance Page

 

 
 

Innovative Products For Kids and Adults

This site is hosted at WebWizards.Net for better value.

CARE TO BE A PRACTICAL SUPPORTER OF THIS SITE?

As you would imagine maintaining this site costs me considerable sums of money in many, many ways. If you believe this site is a valuable and FREE educational resource and, YOU want to keep it that way, then here's how YOU can demonstrate your very practical support for this site..

Thanks to these fine folks making voluntary donations, ensuring this site and our Newsletter remains FREE. Could YOU be listed here for your small contribution in return for your FREE education?. Our grateful thanks.
 

rate this page for me

recommend this page to a friend

Please send me your valuable comments and suggestions! Tell your friends, tell a news group, tell your favourite magazine, heck tell the world!

Absolutely essential to keeping abreast of new and updated electronics tutorials is our comments or subscribe to our highly regarded FREE monthly newsletter form. Unsubscribe any time you like. You can view immediate past issues here to see if it is to your liking.
 

Related topics on capacitance

factors determining capacitance

working voltage and dielectric strength

energy stored in a capacitor

modern capacitors

polarization of capacitors

capacitive reactance



Products offered for the scrolling printers




the author Ian C. Purdie, VK2TIP of www.electronics-tutorials.com asserts the moral right to be identified as the author of this web site and all contents herein. Copyright © 2000, all rights reserved. See copying and links. These electronic tutorials are provided for individual private use and the author assumes no liability whatsoever for the application, use, misuse, of any of these projects or electronics tutorials that may result in the direct or indirect damage or loss that comes from these projects or tutorials. All materials are provided for free private and public use.
Commercial use prohibited without prior written permission from www.electronics-tutorials.com.


Copyright © 2000, all rights reserved. URL - www.electronics-tutorials.com/basics/capacitance.htm
Updated 29th December, 2000
webmaster@electronics-tutorials.com






Click Here!