----------------------------------------------------------
        Several users have reported difficulty using MRP with the
        Ensoniq brand of soundcards (for example, in Gateway 2000
        computers).  You can download the latest drivers and
        tech-support information from their web pages.
                http://www.ensoniq.com/
                http://www.gw2k.com/
        ----------------------------------------------------------

For propper uasge of Ensoniq Soundcards the Blaster emulation
has to be set. Also correct Blaster environmet variable has to be set.
After successfull download and installation of our demoversion
please do this steps:

1. Start Mdec.bat when screen comes up copy "System ID : xxxx xxxx"
2. Send System ID to POLAR.Electric@cww.de
3. Receive KeyCode from POLAR (for limited trial period of fullversion)
4. Modify the Mdec.bat like advised below.
5. Start Mdec.bat when screen comes up hit F1 Key and insert KeyCode


 --------- Modify the Mdec.bat --------------------------------------

 Add two lines to the MDEC.BAT file:

 1) Specify the BLASTER environment variable
 2) Run the SoundBlaster emulation for DOS programs. Use the NOEMM
    program, since MRP372 doesn't need extended memory. This 
    avoids the need to add EMM386 to your CONFIG.SYS

  These lines will vary from computer to computer (different interrupts,
  different subdirectory), but this is basically what MDEC.BAT now 
  looks like for example:
_______________________________________________________________________
SET BLASTER=A220 I5 D1 T1
C:\ENSONIQ\NOEMM
MRP372 -f11025 -mOnline -iLINE -COMx Tx37.wav
_______________________________________________________________________

Note: 
1. you can find correct blaster variable using WIN95 
   You have to find it and to add it manually :
- Start your computer, run WIN95
- Press Start button
- Go to Programs, go to MS-DOS ...
- Type at the DOS-Promt c:\Windows>SET   <return>
- Now a list of settings apperas
- Look for BLASTER=xxxx xx xx xx xxxx xx
- Add it to Mdec.bat

2. To start Morse decoder you can also use the Shortcut MDEC372


POLAR Electric
http://www.POLAR-Electric.com/morse/MRP37