I am no longer maintaining the electronics sections of this site. For an explanation, see the electronics contact page.

Touch Switch


A touch switch is a switch that is turned on and off by touching a wire contact, instead of flicking a lever like a regular switch. Touch switches have no mechanical parts to wear out, so they last a lot longer than regular switches. Touch switches can be used in places where regular switches would not last, such as wet or very dusty areas.

Schematic


Schematic for Touch Switch

Parts


Part
Total Qty.
Description
Substitutions
C1110uF 16V Electrolytic Capacitor
R1, R22100K 1/4 Watt Resistor
R3110 Meg 1/4 Watt Resistor
U114011 CMOS NAND Gate IC
MISC1Board, Wire, Socket For U1

Notes:

1. The contacts an be made with just two loops of wire close together, or two squares etched close together on a PC board.

2. When activated, the output of the circuit goes high for about one second. This pulse can be used to drive a relay, transistor, other logic, etc.

3. You can vary the length of the output pulse by using a smaller or larger capacitor for C1.

Back To Circuits Page | Mail Me | Search