PC33 
PC Compatible Interface
and Control Software

6877-1 Goreway Drive, Mississauga, Ontario, Canada L4V 1L9 
Tel:  (905) 677-5533, Fax:  (905) 677-5030, e-mail:  rms@rmsinst.com

 

The PC33 program allows a user to control a GR33-series of  graphic recorders ( including  GR33, GR33A, GR34, GR34A, GR33U2 and GR33U2S chart recorders) from an IBM-PC* or compatible.  All features of PC33 are applicable to GR33A and GR34A models; only subsets apply to other models.

The Program, Interface Libraries and Source Code are available in three versions:

PC33 Program

The menu driven PC33 program allows the user to perform remotely from a computer in Real-Time, all of the recorder front panel functions and controls via the parallel interface.  Alphanumeric messages can be easily formulated and transmitted for printing in the horizontal, vertical or inverted mode with single keystrokes.

Recorder configurations or set-ups can be downloaded automatically at turn-on or selectively, thereby have the recorder immediately ready for a specific test or application.

In the Edit mode, recorder configuration file(s) can be produced with or without a recorder.  The configuration can be saved on disk and/or downloaded to the recorder as required.

Commands to store configurations that have been downloaded into the recorder's nonvolatile memory are provided.

The program includes menus for controlling the Analog Input Module, Transient Digitizer and ARINC optional modules if they are installed.  Commands are provided for the serial transfer of the Transient data in an ASCII or binary format to the computer for storage and analysis.

Similarly, the program has a Monitor mode where data from the Trace Memory of the recorder can be transmitted via the serial output port of the recorder to be viewed as text or graphically.  At the same time, this data can be logged to disk for later analysis.

The user has the ability to define a channel's sensitivity and set points in Engineering Units.

A Utilities  menu allows the setting of output port parameters, diagnostics as well as recorder test features.

The package also includes an MS-DOS* device driver that interfaces the operating system to the recorder making it appear as a peripheral device.  The recorder can perform any function normally handled by a conventional printer, such as printing files, use of the "print screen" function, and the copying of files to the recorder, etc.

Interface Library

The PC33 Interface Library is a collection of functions that provide a C Language programmer with all the basic tools to quickly and easily create custom programs to control a recorder.

The library of subroutines was developed for MS-DOS* systems and is compatible with the popular Microsoft C - version 5.1 format.  This allows the user to readily link the subroutines with their own program, which is extremely useful when the host computer is also a data acquisition system.  The library will allow traces to be produced on the chart from digital data directly.

Example programs of how to use the library are included with the package.

Source Code

The Interface Library was developed for use on MS-DOS* systems, however, the source code for the routines is available and it may be ported to other systems.  Custom modifications to the routines can then be done.

Refer also to DISP33 Virtual Chart Recorder Display Software.

*IBM-PC Trademark of IBM Corp.
*MS-DOS Trademark of Microsoft Corp.

Specifications subject to change without notice
 
 
 
Optional Interfaces
Thermal Paper
Accessories
E-mail Need more Info?
Technical Notes
Bulletin Board
Employment Opportunities
Year 2000 Compliance
Return Home