| ||
|
Click to find LowFERs and MedFERs currently on the air.
What's all this stuff about LowFERs and MedFERs?Well, LowFER stands for Low Frequency Experimental Radio, and MedFER stands for Medium Frequency Experimental Radio. And they both involve operating radio transmitters under Part 15 of the FCC Rules. The Federal Communications Commission, which we usually associate with regulating radio and TV broadcasting, amateur radio operators, telephone companies and such, makes provision for some types of radio frequency devices that just don't fall under any of its other rules. This body of regulations is known as Part 15, just one of many Parts under Title 47 of the Code of Federal Regulations. In recent years, Canada has adopted similar regulations for its citizens... but not quite identical, particularly in regard to certification of low power devices. See links, below, to these regulations as well. FCC Part 15 rules cover both unintentional radiators (devices such as computers and TV receivers, all of which may generate radio signals as part of their operation, but aren't intended to transmit them); and intentional radiators (such as garage door openers, cordless telephones, wireless microphones, etc., which depend on deliberate radio signals to perform their jobs). It is the intentional radiators which are of interest to us, because by paying attention to detail, we can make them achieve extraordinary results when conditions are right. Although any type of modulation is permitted which will fit in the band, serious experimenters use Morse Code or various digital modes for greatest distance (DX). Are the requirements hard to meet?Depending on the frequencies you wish to use, the requirements can involve tremendously sophisticated RF emission measurements. But not always! Among the various sections and subsections within Part 15 are two interesting provisions. One permits the use of up to 1 watt of power and a 15 meter long antenna between 160 - 190 kilohertz, in the longwave bands, with no license requirement. Another permits similar operation from 510 - 1705 kHz, in the mediumwave band, with 1/10 of a watt and a 3-meter antenna. Experimenters operating under these sections of the rules have taken to calling themselves LowFERs, MedFERs, or both, depending which band(s) they utilize. Are these serious limitations?Antennas of these lengths are very, very short (electrically) at their respective frequencies. Efficiency is naturally a tiny fraction of a percent. Under average conditions, with an ordinary receiver, it was not expected such signals would reach more than a few tenths of a kilometer. However, if one is very resourceful at reducing loss in the antenna system and maximizing efficiency in the transmitter, respectable signals can be detected over longer ranges. Use narrowband transmission modes, such as Morse code or more advanced digital methods, and that range can be multiplied further. Take considerable pains to couple a good antenna to a sensitive, selective receiver in a quiet location (away from manmade static and stray radio signals), and you multiply that range again. Listen in winter, when static is at a minimum and propagation is fairly stable, and you can achieve real DX! Even with the power limits we're talking about, LF and MF experimenters sometimes span 100, 300, and--rarely--800 miles or more. From time to time, full 2-way QSOs take place over these distances. While hams often work the world at very low power levels, to be able to work a few hundred miles at these low frequencies, with virtually no transmitting antenna, takes patience, skill, and love of a challenge. (Consider how static levels increase as you go down the spectrum. By the time you get below 500 kHz, most receivers are deliberately far less sensitive than they are in the shortwave bands. The assumption is, at LF, you won't be wanting to hear anything but the strongest signals over the noise anyway. This is not a valid assumption for LowFERs!) Manmade interference (QRM) is a serious matter in both bands. A Part 15 operator must not cause interference to any licensed service, but must accept interference caused by other services.
LowFERing and MedFERing is not for the faint-hearted, but it can be a lot of fun. And, as long as you keep emissions within the assigned band, you can try all sorts of non-standard modulation methods. While many of these experimenters are also licensed hams, many others are not. Yet we can all hone our technical and operating skills in ways that would otherwise only be possible in the ham bands...and maybe not even there in some cases. Where can I learn more?To learn about the FCC rules, you can download a plain text extract (38KB) of Part 15 here. It is from the 1994 edition, which is still current with regard to 160 kHz and 1600 kHz operation. For a more complete look at Part 15, download one of the following:
Canadian low-power rules are somewhat similar. They are available from a convenient Canadian government site, where you can download the 40-some page rules in Adobe Acrobat (PDF) format. (Use your browser's Back button to return here afterward.) Joe Cooper VE3FMQ has now set up Web pages covering Canadian LowFER topics and construction projects, well worth checking out. Who's On? During the DX season, between issues of The LOWDOWN, we regularly update the Beacon List by Frequency so everyone will have the latest data about who's on the air. We also update the Operator Contact List from time to time, although the most thorough version of this list is published periodically in the magazine. Vendors of kits or equipment for these bands include:
The LWCA File Libraries contain information on transmitting and receiving gear to get you started, and to help you improve the efficiency of your station.
Practical experience of fellow LowFERs is available from their own Web pages. In particular, Lyle Koehler's Page contains information on transmitters, keying, antenna systems, and digital modes. Other LWCA members also have pages with varying degrees of information, which you can access at our Members Pages list. If digital modes might be your cup of tea, check out the links near the bottom of our Amateur Radio & Digital Modes page as well. Read the Longwave Club of America magazine, The LOWDOWN, to get a feel for both LF and MF experimenting. (Click the name for subscription details.) Every month, it carries columns such as "The 1750 Meter Band," reporting on LowFER beacons currently on the air; "The Top End," about MedFER beacons; and "The LF Notebook," which features experimental beacons and other topics. Editor for these columns is John Davis, who is always glad for reception reports, and news from present and future beacon operators. Give a listen! With a bit of care, there's no telling what you may dig up from under the static!
| ||
| ||
|
Copyright 1998-2000, John H. Davis. All Rights Reserved. This document may NOT be mirrored on any other server, nor appear in any commercial publication (including digital media), without the author's written consent. |
![[HOME ICON]](../lwicosm2.gif){kind=small}